<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Well, did you get a good pedal?</p>
<p>bs<br>
</p>
<div class="moz-cite-prefix">On 2/20/2019 3:09 PM, Tom Felts wrote:<br>
</div>
<blockquote type="cite"
cite="mid:1544291114.239471300.1550704150257.JavaMail.zimbra@windstream.net">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial, helvetica, sans-serif;}</style>
<div>Please disregard this message below--I have figured it out.
I had to bleed the masters first before any fluid would come
into them</div>
<div>tom</div>
<div><br>
</div>
<div>----- Original Message -----<br>
From: Tom Felts <a class="moz-txt-link-rfc2396E" href="mailto:tomfelts@windstream.net"><tomfelts@windstream.net></a><br>
To: <a class="moz-txt-link-abbreviated" href="mailto:healeys@autox.team.net">healeys@autox.team.net</a><br>
Sent: Wed, 20 Feb 2019 17:45:32 -0500 (EST)<br>
Subject: Clutch and brake pedal issue<br>
</div>
<div><br>
</div>
<style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial, helvetica, sans-serif;}</style>
<div>OK---so, I have replaced the clutch master and slave with new
units from HS. I have looked at the brake master and it is
clean as a pin. All lines to both systems are tight and there
is new fluid in the cannister.</div>
<div><br>
</div>
<div>Pumping the brake and clutch pedals as much as I can i can
build up no pressure at all in either. I had filled the
cannister before starting----and---I see no decrease in fluid
level in it after pumping the pedals.</div>
<div><br>
</div>
<div>Is it possible that the cannister is clogged up and won't let
fluid get to the masters? Other that that, I'm stumped as to
why I can build up no resistance in either system.</div>
<div><br>
</div>
<div>Any thoughts?</div>
<div><br>
</div>
<div>thanks</div>
<div>tom</div>
<br>
</blockquote>
</body>
</html>