[Healeys] Fasteners

[i erbs]

I would not reuse Rod bolts. No opinion on the others.

Ira Erbs
1959 100-6
MKI engine and disc brakes
Portland,OR

On Sep 24, 2016 1:40 PM, "Bob Spidell" <bspidell at comcast.net> wrote:

> Engine rebuild in progress; wondering which, if any, bolts and studs need
> to be replaced.  Car is a BJ8, with almost 200K miles and (at least) two
> engine rebuilds.  No issues besides low compression--attributed to leaky
> valves and rings--so, I'm wondering, can I reuse head and main studs, and
> rod bolts?  This will be a mostly stock rebuild, with a slightly hotter cam
> (DWR1).
>
> Not trying to pinch pennies, but don't want to overbuild, either.
> Thoughts?
>
> TIA,
>
> Bob
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/eyera3000 at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160924/56dfe0d8/attachment.html>