Carter Hendricks wrote:
>
> On Sat, 24 May 1997 MHKitchen@aol.com wrote:
>
> > In a message dated 97-05-24 01:50:37 EDT, you write:
> >
> > << Consult with someone on how to improve / replace that
> > part and meanwhile put it on a very, very tight leash.
> >
> > BTW, any possible relationship to bigger better modern tires? >>
> >
> > Carter;
> >
> > FYI, the stock hubs are one of those no longer available, irreplacable
> > items (was diferent from stock Cortina hubs). The ONLY replacements
> > available now, are billet alumninum parts, made in the UK. Better,
> > stronger, lighter, and > SAFER!!, but also a lot of $$$$$!!
> >
> > With regard to the tires, that's an obvious point. I'm sure there
> > are higher stresses imposed. However, I'd also contend that bumping a
> > few curbs, and having the wheels in the air as often as the Cortina does,
> > also has a lot to do with it. Its been up at nearly 45 degrees a
> > number of times...and the > landings aren't always so soft!!!
> >
>
> Exactly. I didn't mean my reply to be pointed directly at you. Well
> maybe a little bit, about the tires. And I know nothing more about Lotus
> Cortinas but what I learned looking at a few at an odd shop in El Segundo
> a few years ago. But in the case of many of our cars we are stressing
> parts way more than intended. When we find a fault we have to back off
> and solve the problem, even if it costs more than we like or want.
>
> Back in Rally days the English guys I met told me that if one had a
> puncture on a stage the axle had to be discarded. No discussion. Do
> it.
>
> Axles are a weak point on the 1900 Alfas. The design is a little crude,
> maybe, but the real problem is that early 50's metallurgy was sometimes
> weak. Especially on Italian stuff, even the stuff with lots of pistons.
> And heat treatment was expensive. We have replacement axles made from
> vacuum melt heat treated blanks. I need to order another set and I'll
> ask if the shop wants more oddball business before posting further
> information.
>
> --Carter
Hey Carter!
Is that because the 1900 parts were all made from the rusted metal
scavenged from derelict tanks left by the German (Italian? American?)
army after WWII? That's what I heard.
Thanks for the chocolates!
Susan & Keith
|