ditto on the acetone -ATF...
ptegler
n 1/23/2023 7:50 PM, Hoyt Duff wrote:
> PB Blaster as a penetrant is a workable commercial substitute for
> KROIL, but a 50/50 mix of acetone and ATF is the BEST and superior to
> KROIL.
>
> I like Boeshield for corrosion protection on machined surface.
>
> On 1/23/23, Sujit Roy <triumphstag@gmail.com> wrote:
>> I'm down to my last spray can of this stuff. It lasted a long time, but I
>> just got a shock on the price of a new 16 OZ can at $36 off Amazon. I'm
>> in California and serious rust isn't an issue.
>> It is good, but is there something cheaper that folks are happy with?
>> Please don't recommend WD40. I've used JB80 before someone recommended
>> Kroil, but that is about 23$ for a similar size can.
>>
>> Sujit
>>
>> --
>> Sujit Roy
>> Cupertino, California
>>
>> https://triumphstagblog.wordpress.com/
>>
>
--
Paul Tegler
ptegler@verizon.net www.teglerizer.com
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|