On 1/7/2012 10:35 AM, wbeech@flash.net wrote:
> I use mine for everything from
> pulling(only) spark plugs
A word of warning: I used to work with a fellow back in the day, who
used a 3/8" impact to remove spark plugs (from aluminum heads). In
almost every case, the plug would come out of the hole spinning and
wobbling to the point that he would screw up the last couple of threads
in the hole. Do that enough times, and you've made a problem for yourself.
If you must use a power tool, invest in a 3/8" air ratchet. It doesn't
develop the thread-killing rotational speed of an impact wrench, but
saves your wrists from working.
Jeff Scarbrough
Corrosion Acres, Ga.
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|