I have often thought that some of the nuts behind the wheel could use a good
clout around the ears with something of the same heft as an impact wrench.
However, I use mine exclusively for disassembly. A little PB Blaster and
the impact will usually get the most obstinate bolt started. I generally
don't use it on small diameter bolts, however, unless I have a great need to
shear off a head or two!
I have an air ratchet that I soimetimes use for assembly, but I always do
the final torquing with a wrench or a torque wrench if torque is critical.
Of course, if I wanted critical TALK, I could always call my ex-wife...
Over to you, Jim Muller.
Mike
>
> What nuts would a person use an Impact Wrench
> on?
> How often does one use this tool when doing any or each time of repair
> work?
> -Cosmo Kramer
|