The wire is in a 4 wire loom that is wrapped. You can pull the complete
harness through with-out taking out the steering column out, but you will need
to disconnect the horn assy. to get at the wires.
The stator tube will come out with the wire harness through the steering wheel
and then you can replace the harness or repair the individually wire. Don't
forget to disconnect the wires that come out of the steering box when removing
the stator tube.
Ibsen
----- Original Message -----
From: pethier@comcast.net
To: Ibsen Dow ; triumphs@autox.team.net
Sent: Wednesday, June 18, 2008 10:09 AM
Subject: Re: [TR] steering column inner bushings
-------------- Original message ----------------------
From: "Ibsen Dow" <flashtr3@cox.net>
> Your horn beeping intermittent I suspect, is possibly due to a horn wire
the
> goes through the steering column has some insulation that is worn on the
wire
> and is making contact with ground.
>
> You can remove the wire & replace or repair as needed.
Can you pull that wire through without disassembling the steering column?
When we go to the Back To The Fifties this weekend, we will just pretend to
be waving to someone we know!
--
Phil Ethier West Side Saint Paul Minnesota USA
1962 Triumph TR4 CT2846L, 1992 Saturn SL2, 1993 Suburban,
1994 Miata C package
pethier [at] comcast [dot] net http://forum.mnautox.com/forums/
http://www.flickr.com/photos/pethier
I decry the textmessagization of the American-English language.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|