> Any advice on how to remove and replace the inner bushings on a TR4 steering
> column?
Put a drift punch on the rubber locking button of the old bushings and use a
BFH to collapse them. Then use a wood dowel to drive them out of the column.
When installing the new bushings begin with the locking buttons aligned with
their respective holes. Then tap them into position with a wood dowel of the
same outside diameter as the bushings. You may have to massage them back and
forth a little to align the buttons and holes.
Best regards,
Tom
_________________________________________________________________
The other season of giving begins 6/24/08. Check out the im Talkathon.
http://www.imtalkathon.com?source=TXT_EML_WLH_SeasonOfGiving
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|