I emailed BPNW with the following questions, and thier reply was also as
follows. Am I missing something ... Re: my question related to con rods and now
liners (seems the kit should include the liners, the pix show them>)? I am
going
to call nonetheless. Just that sometimes email is not enuff. Should the
connecting rods be re-used ... normally?
Quoting Popnglo@aol.com:
> Regarding your piston/liner sets for the TR3 series engines (your P/N
> CPK868.060 and CPK868.040). Are these Mahle brand? Is the figure of 8 gasket
> (sleeve
> to block) included? Also the photos do not show the connecting rods. Are the
> old ones expected to be re-used?
They are not the mahl brand but are a copy of the mahl with the pyrite strut
cast into the pistons. The kit includes pistons, rings, pins, clips and
figure
eight gaskets. If we can help you out let us know.
Regards,
Leighton
British Parts Northwest
www.bpnorthwest.com
Phone (503)864-2001
FAX (503)864-2081
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|