Normally, yes.
Bill
Popnglo@aol.com wrote:
> I emailed BPNW with the following questions, and thier reply was also as
> follows. Am I missing something ... Re: my question related to con rods and
>now
> liners (seems the kit should include the liners, the pix show them>)? I am
>going
> to call nonetheless. Just that sometimes email is not enuff. Should the
> connecting rods be re-used ... normally?
>
> Quoting Popnglo@aol.com:
>
>> Regarding your piston/liner sets for the TR3 series engines (your P/N
>> CPK868.060 and CPK868.040). Are these Mahle brand? Is the figure of 8 gasket
>> (sleeve
>> to block) included? Also the photos do not show the connecting rods. Are the
>> old ones expected to be re-used?
>
> They are not the mahl brand but are a copy of the mahl with the pyrite strut
> cast into the pistons. The kit includes pistons, rings, pins, clips and
> figure
> eight gaskets. If we can help you out let us know.
>
> Regards,
> Leighton
> British Parts Northwest
> www.bpnorthwest.com
> Phone (503)864-2001
> FAX (503)864-2081
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|