triumphs
[Top] [All Lists]

DIY powder coating & metalworking

To: triumphs@Autox.Team.Net
Subject: DIY powder coating & metalworking
From: DANMAS <DANMAS@aol.com>
Date: Sun, 10 May 1998 15:51:06 EDT
Listers,

FWIW:

1) The July (current) issue of American Rodder (That's the one with the
scantily clad young ladies on the cover) has an article on the Eastwood home
powder coating system.  They coated a few items, and seemed pleased with the
results.

2) In that same issue, there is a how-to-do-it article on making a *pedestal*
for shaping sheet metal using a sand bag and hand tools.  Looks interesting.
I may build one myself.

3) There is also an article on installing Dzus fasteners.  I believe there was
a question on this subject on the list awhile back (or maybe it was the MG
list).

4) Cover girl Carmen Fontaine sure has some long legs, and very large, ...uh,
...er, ...um, hair!  Yes, that's it, she has large hair.

Dan Masters,
Alcoa, TN

'71 TR6---------3000mile/year driver, fully restored
'71 TR6---------undergoing full restoration and Ford 5.0 V8 insertion - see:
                    http://www.sky.net/~boballen/mg/Masters/
'74 MGBGT---3000mile/year driver, original condition - slated for a V8 soon
'68 MGBGT---organ donor for the '74

<Prev in Thread] Current Thread [Next in Thread>