triumphs
[Top] [All Lists]

Re: DIY powder coating & metalworking

To: DANMAS <DANMAS@aol.com>
Subject: Re: DIY powder coating & metalworking
From: fred thomas <vafred@erols.com>
Date: Sun, 10 May 1998 15:11:32 -0700
Cc: triumphs@Autox.Team.Net
References: <4ffe6d50.3556052b@aol.com>
DANMAS wrote:
> 
> Listers,
> 
> FWIW:
> 
> 1) The July (current) issue of American Rodder (That's the one with the
> scantily clad young ladies on the cover) has an article on the Eastwood home
> powder coating system.  They coated a few items, and seemed pleased with the
> results.
> 
> 2) In that same issue, there is a how-to-do-it article on making a *pedestal*
> for shaping sheet metal using a sand bag and hand tools.  Looks interesting.
> I may build one myself.
> 
> 3) There is also an article on installing Dzus fasteners.  I believe there was
> a question on this subject on the list awhile back (or maybe it was the MG
> list).
> 
> 4) Cover girl Carmen Fontaine sure has some long legs, and very large, ...uh,
> ...er, ...um, hair!  Yes, that's it, she has large hair.
> 
> Dan Masters,
> Alcoa, TN
> 
> '71 TR6---------3000mile/year driver, fully restored
> '71 TR6---------undergoing full restoration and Ford 5.0 V8 insertion - see:
>                     http://www.sky.net/~boballen/mg/Masters/
> '74 MGBGT---3000mile/year driver, original condition - slated for a V8 soon
> '68 MGBGT---organ donor for the '74

And a "Happy Mothers Day" to all.


<Prev in Thread] Current Thread [Next in Thread>