triumphs
[Top] [All Lists]

Re: TR6 vacuum retard

To: "The Romagni's" <mrdr@buckeyeweb.com>, <triumphs@Autox.Team.Net>
Subject: Re: TR6 vacuum retard
From: "Aaron Johnson" <sugar@holly.colostate.edu>
Date: Sat, 8 Mar 1997 09:03:11 -0700
Why would you want to retard the engine.  This is the number one thing that
robs power.  A unhooked vacuum line to the distributor will not cause any
damage, just lower your idle a little bit.


Aaron Johnson
72 TR6 CC84967

----------
> From: The Romagni's <mrdr@buckeyeweb.com>
> To: triumphs@autox.team.net
> Subject: TR6 vacuum retard
> Date: Friday, March 07, 1997 5:35 PM
> 
> Hi all;
> 
> On my 74 TR6, all of the anti-pollution equipment was removed by the
> DPO. Not a licensing problem here in Ohio, however I have a question.
> With the removal also went the thermostatic valve in the radiator water
> line. With that gone, so too is the line to the retard unit on the
> distributor. Obviously the car idles too fast.
> 
> Can I simply re-connect this line to one of the vacuum line's on the
> carbs? Or was vacuum being applied based on the water temp?
> 
> Thanks!
> 
> Marty Romagni
> 74 TR6

<Prev in Thread] Current Thread [Next in Thread>