> Hello Doug
> My original pump started leaking resently. I replaced it with one
> of the newer types you described. I have had no problems with it so
> far. However when I compared the two pumps, I discovered that the new
> types pulley sits 1/4 inch forward of the old pumps pulley. Has anyone
> on the list had any experience with this ?
I got apparently the same brand aftermarket water pump for my '62 Herald
a few years back. The one with the pressed on pulley that's 1/2" too
long. I had to put spacers in my radiator mounts, as the fan was hitting
the radiator.
To the originator of this thread, Stay away! Get the original keyed pump
with the original geometry.
|