Richard Good of Good Parts has aluminum roller rockers for
the TR6 in 1.55 and 1.65 to 1 ratios (stock 1.46). They fit
on the stock TR6 shaft. $499 list for the TR6, seems he sells
TR4 as well, I suspect they are the same!
The stock 72-76 TR6 valve springs will do with the stock cam,
increases the lift slightly. To really make it scream, you need
his cam which is slightly "weaker" than the S-2, but with a faster
raise, giving a little better idle and more HP. You can install
the cam without his rollers, leaving the option to add rollers later.
Cam is $169 exchange.
He is in PA, I have a number somewhere, I'd like any opinions
if you buy from him. Has one of the fastest and best handling TR6
at the TRF summer party and best handling.
Also sells a triple Stromberg kit, same HP as triple Webers for 1/5
the cost.
I'm using his front/rear sway bar kit right now, beautiful look/fit!
7/8" bars front and rear. This and the 15x7 PanaSports should provide
the glue. We'll know as soon as I find a paint place.
Roger
--
-----------------------------------------------------------
Roger G. Bolick, rgb@exact.com, (512) 794-9567, FAX 345-2879
|