>
>I've finally developed an intolerance to my TR4's rattling doors.
>Both doors make a terrible racket on bumpy roads. I've had a
>look inside but can't figure out what's making the noise.
>The rattle seems to come from the the top of the door at the
>rear where the lock is. Has anyone else had this problem?
>And more to the point has anyone fixed it?
>
>Paul.
>
>
Paul,
You may get a double dose of this message. There was just a "glitch"
on this system and I lost it for a whil.
To try and give you some help, I had the same problem with my TR4.
Tighten or replace the clevis clips holding the linkages to their
respective
ends. Also, I found that spraying the inside of an appropriate length of
vaccuum hose and sliding it over the linkage rods helps to reduce
vibration. Some of the curves on the linkages are a little tricky, but it
can be done. Good luck.
Tony R.
69GT6
68GT6
64TR4
TTFN
###
|