Here's Jeff's account:
> http://www.totallytriumph.net/spitfire/hard_lesson.shtml#studs
Looks like the nuts he eventually used (from Spitbits) were NOT beveled
on both ends, but they are different than the VB ones.
I'd still recommend upgrading to 7/16" studs.
MDN
--- ZoboHerald@aol.com wrote:
> Feel free to reply only to me unless others voice a similar desire to
>
> know....
>
> Can anyone provide me with reasonably accurate dimensions, such as
> height,
> and whether they are conical/beveled/whatever on one or both sides,
> for the
> nuts holding the wire wheel adapters to the hubs on a Spitfire/GT6?
>
> Thanks in advance! I've encountered a couple cars in the last year or
> so
> where these nuts looked a little too much like regular wheel nuts!?
>
> --Andy Mace
Tired of spam? Yahoo! Mail has the best spam protection around
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|