spitfires
[Top] [All Lists]

Re: GT6 caliper/rotor on Spitfire

To: oldtoys@charter.net, spitfires@autox.team.net
Subject: Re: GT6 caliper/rotor on Spitfire
From: zoboherald@aol.com
Date: Tue, 22 Nov 2005 10:56:31 -0500
-----Original Message-----
From: Creig Houghtaling <oldtoys@charter.net>

... Perhaps my Mk III 4.5" wheels are the same as these? (That is what 
mine look like.)

==AM==
Oops! Hit SEND too soon. I did want to add that chances are your 4.5" 
wheels are the Dunlop wheel, with "LP875" stamped on the face of the 
hub. That's what usually was used on the 1970 Spitfire and the GT6 
(pre-Mk3) with disc wheels. It was also used on some Herald Estates and 
Vitesses as well as being an aftermarket accessory wheel.

--Andy  Mace

*Mrs Irrelevant: Oh, is it a jet?
*Man: Well, no ... It's not so  much of a jet, it's more your, er, 
Triumph Herald engine with  wings.
 -- Cut-price Airlines Sketch, Monty Python's Flying Circus  (22)

Check out the North American Triumph Sports 6 (Vitesse 6) and Triumph 
Herald Database at its new URL: <http://triumph-herald.us>


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>