Don't know the EZ-ON brand. One of my cars has a Robins top. It's
nice, with a somewhat more leather look to it than others. I've got a
Crown top on one of the others. More grainy than the Robins, also cost
less than $200. No pre-installed snaps, with a zip out window.
Pre installed snaps certainly make installation easier. But that's
only if the snaps are in the right places. But it's not a big deal to
install your own snaps. The time spent worrying about it is much more
than the time spent actually doing it.
Chalk line the center of the fabric top and the center of the front
bow. Then work on a warm day with a good adhesive and a few hours of
time. You shouldn't need the few hours, but it's nice to have them so
you don't feel rushed. Set it so it pulls snug when closed, but not
rippingly so. Smoothly fold the leading edge under across the front.
Reinstalling the front rubber seal is the hardest part, and that's not
very difficult if you use silicone spray to lube it. It'll slip in
easily then.
-----------------------------------------------------
The information contained in this communication may be confidential, is
intended only for the use of the recipient named above, and may be legally
privileged.
If the reader of this message is not the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
communication, or any of its contents, is strictly prohibited.
If you have received this communication in error, please re-send this
communication to the sender and delete the original message and any copy of it
from your computer system. Thank you.
-----------------------------------------------------
<<<<GWIASIG 0.07>>>>
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|