shop-talk
[Top] [All Lists]

Re: [Shop-talk] Nuts and Bolts

To: Randall <TR3driver@ca.rr.com>
Subject: Re: [Shop-talk] Nuts and Bolts
From: "Elton E. (Tony) Clark" <eltonclark@gmail.com>
Date: Mon, 19 Aug 2013 07:13:19 -0500
Cc: Shop Talk List <shop-talk@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <CA+7Nz3p97G5qLZuqMTPjADbwGJPr2sZF5PtGvMkXVB6O6s2Cdw@mail.gmail.com> <57.16.05415.A5702125@cdptpa-omtalb.mail.rr.com>
Yep, if I were you, I'd stick with the pasta.
Tony


On 19 August 2013 06:54, Randall <TR3driver@ca.rr.com> wrote:

> > AND your Chinese
> > bolt will likely
> > fatigue-strip and dump your T-bone in the dirt tomorrow
>
> The trick is in knowing if a fastener is adequate for the job.  Some
> applications, even Grade 8 won't cut the mustard (5 is actually pretty
> soft); but sometimes even old pasta will do.  That particular bolt has been
> doing it's job for some 30 years now, so I really doubt it will fail
> tomorrow.
>
> -- Randall
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/eltonclark@gmail.com
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>