shop-talk
[Top] [All Lists]

Re: [Shop-talk] Painting inside a chassis

To: ejrussell@mebtel.net, shop-talk@autox.team.net
Subject: Re: [Shop-talk] Painting inside a chassis
From: Steven Trovato <strovato@optonline.net>
Date: Wed, 04 Jan 2012 12:39:10 -0500
The first thing every MGA owner needs to do is find Barney Gaylord's 
site, http://mgaguru.com/.  Go to the expanded Tech Index and prepare 
to spend many hours reading.  Here is one page you might find 
interesting:   http://mgaguru.com/mgtech/frame/fr105.htm.  Then, 
you'll want to check out the MG Enthusiasts forum at 
http://www.mgcars.org.uk/, and the MG Experience forum at 
http://www.mgexperience.net/phorum/.  There's lots of great info to 
be had on shop-talk, but for MGA specific stuff, I recommend the 
above.  Good luck with the project.

-Steve Trovato
strovato@optonline.net

At 11:32 PM 1/3/2012, ejrussell@mebtel.net wrote:
>Seeking opinions about painting the chassis of my MGA. The chassis 
>is box sections and of course the inside never received any 
>rust-proofing/paint etc in 1960. As I am finishing up the repairs 
>needed I would like to get something inside to preserve it for the 
>next 50 years.
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>