shop-talk
[Top] [All Lists]

Re: [Shop-talk] Run air tools on a water hose?

To: <malaboge@aol.com>, <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Run air tools on a water hose?
From: "Gerald Brazil" <gerrybraz@cablespeed.com>
Date: Sun, 14 Aug 2011 09:53:22 -0400
Why not try an old fashioned compression test? Disconnect the pipe going
into the tank and hold a compression tester to it tightly. Have somebody
turn on the compressor and try to hold on. 

 

In order to get a good idea you need to do the same test on a friends air
compressor and see what kind of difference you have. 

 

I wore out a compressor on my first machine. Since the motor and tank were
still good I just replaced the compressor..I got another 5 years and then I
upgraded to a larger capacity compressor. 
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>