shop-talk
[Top] [All Lists]

Re: [Shop-talk] home plating kits

To: Doug Braun <doug@dougbraun.com>, 'Shop Talk List'
Subject: Re: [Shop-talk] home plating kits
From: Steven Trovato <strovato@optonline.net>
Date: Sat, 17 May 2008 13:53:13 -0400
Another thing you can do is stick a light bulb in the circuit.  This 
kit from the UK uses a car battery and light bulb. (not provided, of course)

http://www.bullnet.co.uk/shops/test/zinc.htm

At 09:34 AM 5/17/2008, Doug Braun wrote:
>Things like filtering and electronic regulation aren't
>necessary for a plating setup.
>
>You can probably control the current by changing the
>size of the anode (or is it a cathode?), and the
>distance from the anode to the work.  If you have a
>6/12 volt battery charger, you can swithc the setting.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>