shop-talk
[Top] [All Lists]

Re: Tables saw for a newbie

To: <shop-talk@autox.team.net>
Subject: Re: Tables saw for a newbie
From: "Harold Pulcher" <pulcher@killercomputing.com>
Date: Tue, 9 Dec 2003 15:15:36 -0600
You are right.

I was thinking more along the lines having the tablesaw be sturdy and large
enough in the right places to allow a person to just worry about their
performance, not the saws.

I know I still have a lot to learn.


Harold

----- Original Message ----- 
From: "Steven Trovato" <strovato@optonline.net>
To: <shop-talk@autox.team.net>
Sent: Tuesday, December 09, 2003 1:49 PM
Subject: Re: Tables saw for a newbie


>
> As far as I'm concerned, cutting full sheets of plywood is all a matter of
> good infeed and outfeed support.  I have a couple of plastic Stanley (ZAG)
> adjustable sawhorses.  You can be as creative as you want...  fancy
rollers
> or whatever clamped to the top of the sawhorses.  The important thing is
> that the sheet is supported.  You are then pushing it through, not
> wrestling with it.
>
> At 10:10 AM 12/9/03, Harold Pulcher wrote:
> >I have not had a real problem man handling a full sheet of plywood
through
> >it.





<Prev in Thread] Current Thread [Next in Thread>