From: Timothy Surdel <email@example.com>
To: firstname.lastname@example.org <email@example.com>
Date: Saturday, July 31, 1999 1:19 PM
Subject: '73 MG Midget Clutch Problems
>Installed new...clutch. No clutch pedal.
The method that has worked for me is to use a large syringe with a
short length of hose connected to the bleeder on the slave cyl. Fill
master cyl, open slave bleed and suck air/fluid out with syringe. May
take more than one try to get all the air out. Close the bleeder
between attempts. Don't run master cyl too low either...