Re: rounded off nut removal

To:	<McVintage@aol.com>, <shop-talk@autox.team.net>
Subject:	Re: rounded off nut removal
From:	"Phil Ethier" <pethier@isd.net>
Date:	Mon, 8 Feb 1999 20:16:36 -0600

From: McVintage@aol.com <McVintage@aol.com>


>Suggestions wanted for removing rounded off nut where space and
>clearance around the nut are VERY limited. Its at the flange joining
>diff to prop shaft on my TR6 - on the diff side of the flange.


If you must, grind the sucker with a dremel tool.

Phil Ethier    Saint Paul  Minnesota  USA
Lotus Europa, VW Quantum Syncro, Chev Suburban
LOON, TCVWC, MAC
pethier@isd.net     http://www.visi.com/mac/

<Prev in Thread]	Current Thread	[Next in Thread>
Re: rounded off nut removal, (continued) Re: rounded off nut removal, Tony Clark Re: rounded off nut removal, Steve Hammatt Re: rounded off nut removal, Jim & D'Anne Re: rounded off nut removal, Bob Bachman Re: rounded off nut removal, Tony Clark Re: rounded off nut removal, Eric Murray Re: rounded off nut removal, jvanho01 Re: rounded off nut removal, Tony Clark Re: rounded off nut removal, Art Pfenninger Re: rounded off nut removal, Roland Wilhelmy Re: rounded off nut removal, Phil Ethier <= Re: rounded off nut removal, Nils O. Ny Re: rounded off nut removal, Trevor Boicey Re: rounded off nut removal, Gordon Glasgow RE: rounded off nut removal, Gano, Ken

Previous by Date:	Re: blue flames & smoking PB Blaster -was rounded off nut removal, Charlie Kish
Next by Date:	re: blue flames and smoking PB Blaster, Aaron Bergman
Previous by Thread:	Re: rounded off nut removal, Roland Wilhelmy
Next by Thread:	Re: rounded off nut removal, Nils O. Ny
Indexes:	[Date] [Thread] [Top] [All Lists]