shop-talk
[Top] [All Lists]

RE: separating aluminum and steel parts

To: <shop-talk@Autox.Team.Net>
Subject: RE: separating aluminum and steel parts
From: tw@mcc.com
Date: Thu, 7 Jan 1999 14:29:35 -0600
I too have had excellent results with Kroil (see http://www.kanolabs.com, as
far as I know they only sell it direct), but patience is definitely
required. I have just about finished off my current gallon of Kroil so I
just ordered a gallon of SiliKroil, same stuff but with silicone, supposed
to penetrate even better. I'll report back on whether I can tell any
difference.

> -----Original Message-----
> From: shop-talk-owner@Autox.Team.Net
> [mailto:shop-talk-owner@Autox.Team.Net]On Behalf Of Gerald Brazil
> Sent: Thursday, January 07, 1999 1:26 PM
> To: 'Jack W Drews'; shop-talk@Autox.Team.Net
> Subject: RE: separating aluminum and steel parts
>
>
>
> Uncle Jack have you tried using a penetrant called Kroil made by Kano
> Chemical down in Tennessee? Best stuff I have ever used....


<Prev in Thread] Current Thread [Next in Thread>