Jack, I agree that the type of pain you use will determine the answer to
many of your questions and manufacturers should provide optimal
treatment instructions.
While I was researching how I would handle my shop floor I came across a
company in Georgia (I think) that advertised a "performance flooring"
product. I sent for their info and if you are interested I will try and
dig it up. Their process is epoxy based and beyond a simple paint
involves laying a base coat that is then layered with a fine grade of
sand and then recoated to provide a surface many mills thicker than paint
alone. It is fairly expensive compaired to paint but is supposed to be
first class. Many of the NASCAR shops have used the product and rave
about it.
I will see if I can find the info.
mrb
|