mgs (date)
May 31, 2000
- Re: garage tools, MGMagnette, 22:37
- Tube shock conversion, Craig D. Niederst, 22:11
- RE: '71 Dash, Larry Hoy, 22:05
- Re: Car stacker, Bullwinkle, 21:44
- RE: Front Wheel Bearing "End Float", Glenn Schnittke, 21:41
- Re: Minilite wheels, Max Heim, 21:41
- Re: Choosing a carb for a '79B, Max Heim, 21:41
- Re: The Final Shimmy, Barney Gaylord, 21:30
- Re: Choosing a carb for a '79B, Bullwinkle, 21:25
- Re: wierdest starting problem solved, and carb hearsay, Barney Gaylord, 21:17
- RE: MG with an attitude, Bullwinkle, 21:08
- Re: Car stacker, Trevor Boicey, 21:05
- Re: Car stacker, Geoffrey Gallaway, 20:58
- Re: Car stacker, Trevor Boicey, 20:13
- Re: wierdest starting problem solved, and carb hearsay, Max Heim, 19:41
- Re: wierdest starting problem solved, and carb hearsay, Dave Wood, 19:36
- Re: garage tools, Bullwinkle, 18:50
- Re: mga with 240z engine/tranny, Bullwinkle, 18:43
- The Final Shimmy, Dan DiBiase, 18:40
- Re: Midget advice, Anne and Richard Spurling, 17:54
- wierdest starting problem solved, and carb hearsay, Garner, Joseph P., 17:53
- Re: '71 Dash, Max Heim, 17:41
- Re: garage tools, Max Heim, 17:41
- Re: Choosing a carb for a '79B, Max Heim, 17:41
- RE: '71 Dash, Larry Hoy, 17:00
- Re: Choosing a carb for a '79B, WSpohn4, 16:30
- Reverse light switch, Enrique Claure, 16:30
- Re: mga with 240z engine/tranny, Bullwinkle, 16:23
- Re: MGTD Paint, Bullwinkle, 16:11
- Re: mga with 240z engine/tranny, James Nazarian Jr, 16:02
- Re: '71 Dash, Peter Edmands, 15:55
- MG with an attitude, Bullwinkle, 15:46
- Re: garage tools, Max Heim, 15:42
- Alpines -- why not?, Max Heim, 15:41
- Re: garage tools, Walt Goddard, 15:21
- Groovy, David Hill, 15:20
- Re: garage tools, Dan DiBiase, 15:18
- Re: mga with 240z engine/tranny, Dan DiBiase, 15:17
- Re: mga with 240z engine/tranny, Kevin Sullivan, 15:00
- Re: MGTD Paint, David Littlefield, 14:52
- Re: mga with 240z engine/tranny, Dan DiBiase, 14:51
- Re: [Re: Coil springs and sports coils : 2 questions], Dan DiBiase, 14:50
- Re: Minilite wheels, Dave Houser, 14:37
- Re: garage tools, Dave Wood, 14:24
- Re: Choosing a carb for a '79B, Bill Saidel, 14:09
- mga with 240z engine/tranny, Kevin Sullivan, 14:06
- Re: [Re: Coil springs and sports coils : 2 questions], Matthew Trebelhorn, 13:41
- MGTD Paint, Steve Darby, 13:32
- Re: garage tools, Geoffrey Gallaway, 13:24
- Re: '71 Dash, James Nazarian Jr, 13:01
- Re: ?repair brake switch, Bullwinkle, 12:55
- Re: re[2]: Choosing a carb for a '79B, Andrew B. Lundgren, 12:50
- Re: Coil springs and sports coils : 2 questions, Larry Macy, 12:49
- Re: Choosing a carb for a '79B, Max Heim, 12:48
- Re: Front Wheel Bearing "End Float", Max Heim, 12:48
- Re: Minilite Wheels, Max Heim, 12:48
- Re: garage tools, Max Heim, 12:48
- re[2]: Choosing a carb for a '79B, David G.Butcher, 12:48
- Re: Midget advice, Eric, 12:45
- Re: '71 Dash, Andrew B. Lundgren, 12:42
- Re: Minilite Wheels, WSpohn4, 12:38
- Re: úNo power to my washer., Paul Hunt, 12:37
- Re: brit car week with Attitude, James Nazarian Jr, 12:34
- Re: '71 Dash, Bullwinkle, 12:30
- Re: Sports Coil Plug Gap, Eric, 12:30
- Re: Choosing a carb for a '79B, Ajhsys, 12:28
- Re: '71 Dash, Ajhsys, 12:28
- Re: Sunbeam Alpine, Dave Wood, 12:27
- Re: Sports Coil Plug Gap, Eric, 12:23
- re[2]: Choosing a carb for a '79B, David G.Butcher, 12:23
- RE: Stuck wire wheel, James Nazarian Jr, 12:15
- Re: Choosing a carb for a '79B, Bill Saidel, 12:11
- RE: Midget advice, Bullwinkle, 12:10
- Re: Coil springs and sports coils : 2 questions, Dan DiBiase, 12:05
- Re: '71 Dash Correction, British Sportscar Center, 12:02
- Re: '71 Dash, Dan Dwelley, 11:01
- Re: Midget advice, Bob Howard, 10:50
- Choosing a carb for a '79B, David G.Butcher, 10:45
- ?repair brake switch, Brinkman, Gerardo V, 10:42
- Re: '71 Dash Correction, Joe7670, 10:31
- Re: Midget advice, Ajhsys, 10:22
- Re: '71 Dash, Ajhsys, 10:22
- Re: Minilite Wheels, Dan DiBiase, 10:12
- Front Wheel Bearing "End Float", Walt Goddard, 10:04
- Re: Hello All, Dan DiBiase, 10:04
- Re: brit car week with Attitude, wcameyer, 10:03
- Re: Minilite Wheels, WSpohn4, 09:48
- Coil springs and sports coils : 2 questions, Matthew Trebelhorn, 09:47
- Fw: Minilite Wheels, Jack Baker, 09:29
- Re: Ordering from Overseas, Paul Hunt, 09:24
- Midget advice, Thomas Nelson, 09:08
- Re: Minilite Wheels, Dan DiBiase, 08:48
- '71 Dash, Joe7670, 08:30
- Re: Hello All, Ajhsys, 08:29
- Re: '78 1500 Running Rough, Ajhsys, 08:29
- Re: Hello All, Charley & Peggy Robinson, 07:56
- Re: Minilite Wheels, WSpohn4, 07:40
- RE: Minilite Wheels, Gordon Bird, 07:20
- LBC sited on Guam, Ken Waringa, 07:20
- Re: Ordering from Overseas, Barney Gaylord, 07:06
- Re: Re: '78 1500 Running Rough, mgraziano, 07:04
- Re: brit car week with Attitude, Dan DiBiase, 07:04
- Re: Minilite Wheels, Dan DiBiase, 06:51
- Re: '78 1500 Running Rough, Dan Dwelley, 06:07
- Hello All, Doug_Cameron, 05:50
- Oil Cooler, Jethogger, 05:08
- brit car week with Attitude, Barney Gaylord, 00:42
- Martin Watson ?, xirias, 00:41
- Re: Car stacker, Trevor Boicey, 00:39
- RE: Stuck wire wheel, Duinhoven_Hans, 00:15
- RE: ?repair brake switch, Duinhoven_Hans, 00:07
- RE: No power to my washer., Duinhoven_Hans, 00:00
May 30, 2000
- Re: New addition - 52TD basket case, Charley & Peggy Robinson, 23:00
- Re: Sports Coil Plug Gap, Charley & Peggy Robinson, 22:56
- Re: Sports Coil Plug Gap, Charley & Peggy Robinson, 22:51
- '78 1500 Running Rough, Tomsaudi, 21:58
- Re: Car stacker, Dave Wood, 21:48
- Re: Separating tie rod from steering rod, Dave Wood, 21:45
- Stuck wire wheel, Bud Krueger, 19:54
- Kai- Non LBC Help Needed, J R Overcash, 19:03
- ?repair brake switch, Chris Spenceley, 18:54
- Re: windshield repair-Reply, Scotty, 18:11
- Minilites thanks, Jack Baker, 17:59
- Car stacker, Bullwinkle, 17:08
- GRM & Judson superchargers, M. Edwin Vaughan, 16:54
- Re: ?repair brake switch, Bullwinkle, 16:42
- Re: Sports Coil Plug Gap, Eric, 16:40
- Re: TD Wiper, Bullwinkle, 16:39
- Re: No power to my washer., Enrique Claure, 16:27
- RE: wierdest starting problem. help!, Max Heim, 16:03
- Re: You want what? When? HOW MUCH ! happy new owner, Mike Razor, 15:51
- Re: windshield repair, Rick Brown, 15:43
- RE: wierdest starting problem. help!, Garner, Joseph P., 15:40
- Re: Separating tie rod from steering rod, David Hill, 15:26
- Car related Joke, WSpohn4, 13:06
- Re: Minilite Wheels, WSpohn4, 12:59
- Re: Ordering from Overseas, Paul Hunt, 12:41
- Re: Separating tie rod from steering rod, Bullwinkle, 12:25
- Re: wierdest starting problem. help!, Paul Hunt, 12:12
- Re: brit car week with Attitude, Bullwinkle, 12:06
- Re: Still having problems!, Paul Hunt, 12:03
- Brit Car Week with Attitude, Nina Barton, 11:58
- Re: no spark, Paul Hunt, 11:56
- Re: No power to my washer., Paul Hunt, 11:53
- RE: Show announcement-British Cars by The Sea, Dodd, Kelvin, 11:49
- Re: Building a rollover for Body work, Arnold Molloy, 11:20
- Re: Glenwood Springs anyone?, Andrew B. Lundgren, 11:02
- Ordering from Overseas, MGMagnette, 11:02
- RE: Glenwood Springs anyone?, Larry Hoy, 10:55
- Re: brit car week with Attitude, William M. Gilroy, 10:47
- Re: Engine wont keep running, Paul Hunt, 10:13
- Re: New addition - 52TD basket case, Frank Krajewski, 10:08
- Re: British Motor Heritage... to FORD, Paul Hunt, 10:06
- Re: Fuel pump?, Kevin Sullivan, 09:56
- Re: Sports Coil Plug Gap, Paul Hunt, 09:52
- Re: Fuel pump very noisy, Paul Hunt, 09:46
- Re: Classic car smog inspection, Larry Macy, 09:32
- Show announcement-British Cars by The Sea, Bob Howard, 09:23
- Re: Separating tie rod from steering rod, Kimo Tichgelaar, 09:18
- Re: brit car week with Attitude, Ajhsys, 08:44
- Glenwood Springs anyone?, Kevin Sullivan, 08:36
- Re: Separating tie rod from steering rod, Dave Wood, 08:23
- Re: windshield repair, Bob Howard, 08:05
- Re: Classic car smog inspection, Dan DiBiase, 07:33
- Re: Separating tie rod from steering rod, Bob Howard, 07:31
- Bolt removal postponed :(, Chris Rose, 07:21
- Autozone on alternators, Bill Saidel, 07:08
- RE: Minilite wheels, Duinhoven_Hans, 06:51
- RE: Minilite wheels, Gordon Bird, 06:22
- RE: no spark, Duinhoven_Hans, 04:06
- no spark, Michael Jose, 03:34
- Re: Can't get freeze plug fitted, Bullwinkle, 00:36
- Re: wierdest starting problem. help!, Bullwinkle, 00:13
- RE: Still having problems!, Duinhoven_Hans, 00:10
May 29, 2000
- Minilite wheels, Jack Baker, 23:44
- Re: Separating tie rod from steering rod, Dave Wood, 23:03
- Re: windshield repair, John H. Reynolds, 22:32
- Re: windshield repair, Bill Saidel, 21:18
- windshield repair, jmc, 20:53
- New addition - 52TD basket case, Bud Krueger, 20:15
- RE: wierdest starting problem. help!, Garner, Joseph P., 19:38
- Re: Separating tie rod from steering rod, Dave Wood, 19:14
- Major body work, David Mrozinski, 18:56
- Re: door panels, Robert Sexson, 18:49
- Re: Separating tie rod from steering rod, David Councill, 18:26
- RE: wierdest starting problem. help!, Bullwinkle, 18:22
- Re: question on alternator, Craig D. Niederst, 18:22
- Re: Separating tie rod from steering rod, wizardz, 17:49
- Separating tie rod from steering rod, Dave Wood, 17:17
- Re: question on alternator, Bud Krueger, 16:14
- You want what? When? HOW MUCH ! happy new owner, wizardz, 16:04
- question on alternator, Bill Saidel, 15:36
- Can't get freeze plug fitted, BobMGT, 15:24
- Re: brit car week with Attitude, Eric, 14:09
- Re: Should I use Sealant on a Freeze Plug?, Max Heim, 13:41
- Re: Still having problems!, Phil Bates, 13:28
- Re: Should I use Sealant on a Freeze Plug?, Phil Bates, 13:22
- Still having problems!, Michael E. Blair, 13:22
- Should I use Sealant on a Freeze Plug?, BobMGT, 13:10
- MG and Triumph under different ownership!, Simon Matthews, 12:52
- Free Jag Engine [OT], Max Heim, 12:21
- Barney and the Alaska pics, Tim Economu, 12:16
- Re:Strokers, WSpohn4, 11:52
- MG Models, Gert Willemsen, 10:50
- Help needed CT, Carl French, 10:46
- Re: wierdest starting problem. help!, Max Heim, 10:39
- Re: Sealed Batteries, Max Heim, 10:39
- Re: Fuel pump very noisy, Max Heim, 10:39
- Re: Engine wont keep running, Max Heim, 10:39
- Re: Sports Coil Plug Gap, Charley & Peggy Robinson, 10:29
- Re: Sports Coil Plug Gap, Keith Gernert, 09:17
- Steering Rack, Jack Baker, 08:47
- RE: Greasing steering rack, Duinhoven_Hans, 08:44
- Re: (MG web sites), JustBrits, 08:43
- Re: Greasing steering rack, Gordie Bird, 08:33
- RE: Accelerator Linkage, Eugene Balinski, 08:04
- Re: Greasing steering rack, Eugene Balinski, 07:57
- Re: (MG web sites), Robert C. Galli, 07:39
- MGB Rotator Plans, Barrie Robinson, 06:55
- Re: Building a rollover for Body work, MGTD1952, 05:40
- Re: Building a rollover for bodywork, Charles D. Sorkin, 05:38
- Re: A/C in a GT, Dave Houser, 04:29
- RE: wierdest starting problem. help!, Duinhoven_Hans, 00:41
- Re: brit car week with Attitude, James Nazarian Jr, 00:40
- RE: No power to my washer., Duinhoven_Hans, 00:39
- RE: wierdest starting problem. help!, Duinhoven_Hans, 00:31
- RE: Accelerator Linkage, Duinhoven_Hans, 00:26
May 28, 2000
- RE: Octane Boosters, Bullwinkle, 23:01
- RE: wierdest starting problem. help!, Garner, Joseph P., 22:39
- Re: Sports Coil Plug Gap, REwald9535, 21:55
- No power to my washer., Enrique Claure, 21:33
- Re: wierdest starting problem. help!, Bullwinkle, 21:23
- Re: MG TD/TF Anti-roll bar, Bullwinkle, 21:20
- Re: Sports Coil Plug Gap, Charley & Peggy Robinson, 21:20
- Re: wierdest starting problem. help!, Charley & Peggy Robinson, 21:05
- RE: Octane Booster, Bullwinkle, 20:57
- RE: Aluminum heads, Bullwinkle, 20:55
- Re: Fuel pump very noisy, Bullwinkle, 20:53
- RE: Cold Valve clearances, Bullwinkle, 20:53
- brit car week with Attitude, Barney Gaylord, 20:46
- UNstuck 77B wheel!!!, C. Allen Shaffer, 20:42
- Re: (MG web sites), Barney Gaylord, 20:06
- RE: wierdest starting problem. help!, Alan Pfau, 19:26
- Re: Building a rollover for Body work, Elliott DeGraff, 17:01
- wierdest starting problem. help!, Garner, Joseph P., 16:40
- Re: Sports Coil Plug Gap, Bob Howard, 16:06
- Re: Shimmy-Shimmy-Shake Revisited..., Eugene Balinski, 16:04
- Re: Greasing steering rack, John H. Reynolds, 15:08
- Re: Building a rollover for Body work, John H. Reynolds, 15:03
- My First Autocross (and the B's too), danray, 14:54
- Re: Accelerator Linkage, danray, 14:25
- Re: Accelerator Linkage, Dr David McNaughton, 14:19
- Sports Coil Plug Gap, Eric, 14:19
- Greasing steering rack, Jack Baker, 14:04
- Sealed Batteries, BobMGT, 13:11
- Accelerator Linkage, Geoffrey Gallaway, 13:03
- TD Manifold Gasket Question, BobMGT, 12:34
- Re: British Motor Heritage... to FORD, KGROWLER, 12:05
- RE: Fashion Gods Dictate Terminal Ugliness, Dan DiBiase, 10:33
- Grease & Lurication (Late 'B), Eugene Balinski, 10:27
- Shimmy-Shimmy-Shake Revisited..., Dan DiBiase, 10:17
- Re: Sports Coil Plug Gap, David Councill, 10:16
- Re: Engine wont keep running, David Councill, 10:12
- Re: Engine wont keep running, Paul Hunt, 10:06
- Re: CLICK, Paul Hunt, 09:59
- Re: British Motor Heritage... to FORD, Paul Hunt, 09:52
- Re: British Motor Heritage... to FORD, Paul Hunt, 09:52
- Re: Building a rollover for Body work, Enrique Claure, 07:34
- Building a rollover for Body work, David Mrozinski, 07:28
- Re: Engine wont keep running, Mike Razor, 06:21
- RE: Fashion Gods Dictate Terminal Ugliness, Bill Saidel, 05:49
- RE: Fashion Gods Dictate Terminal Ugliness, Larry Macy, 05:15
- A/C in a GT, Dave Houser, 03:51
May 27, 2000
- Fuel pump very noisy, Enrique Claure, 22:23
- Re: CLICK, Bullwinkle, 22:01
- Engine wont keep running, Geoffrey Gallaway, 21:55
- Re: CLICK, Carl French, 21:35
- Re: Aluminum heads -- spark plug torque, Bullwinkle, 21:00
- Re: impatience is not a virtue, Dan DiBiase, 20:56
- Re: Aluminum heads -- spark plug torque, Dave Wood, 19:59
- Re: Bent Bonnet Update, Max Heim, 19:40
- Re: CLICK, Max Heim, 19:40
- Re: impatience is not a virtue, Dave Wood, 19:37
- Re: CLICK, Dave Wood, 19:30
- impatience is not a virtue, Garner, Joseph P., 18:01
- Re: British Motor Heritage... to FORD, Andrew B. Lundgren, 17:50
- Re: Stuck 77B Wheel..., Max Heim, 17:41
- Re: Stuck 77B Wheel..., David Councill, 17:16
- Re: Bent Bonnet Update, David Councill, 17:11
- Bent Bonnet Update, Eric, 16:34
- CLICK, Carl French, 16:18
- Re: British Motor Heritage... to FORD, Bullwinkle, 16:07
- Re: Fashion Gods Dictate Terminal Ugliness, Charles D. Sorkin, 15:23
- Re: Aluminum heads -- spark plug torque, Charles D. Sorkin, 15:16
- Stuck 77B Wheel..., C. Allen Shaffer, 14:39
- Re: sun roof, BONNILA, 14:30
- Re: The wrong list, Bullwinkle, 14:10
- Re: Bent Bonnet Update, Dave Wood, 13:56
- Re: British Motor Heritage... to FORD, Max Heim, 13:41
- [no subject], Robert C. Galli, 13:28
- RE: British Motor Heritage... to FORD, Larry Hoy, 12:56
- Re: All Readers and Listers, Barrie Robinson, 12:36
- Re: Fashion Gods Dictate Terminal Ugliness, Max Heim, 12:28
- Re: Fashion Gods Dictate Terminal Ugliness, Max Heim, 12:28
- Re: The wrong list, Steve Conley, 12:22
- Re: Oil Filters - general, Steve Conley, 12:17
- For Sale, MGBBRENDA, 11:26
- Re: V8 brake pads, Paul Hunt, 11:15
- Re: Wheel bearings, Paul Hunt, 11:14
- Re: What size?, Paul Hunt, 11:11
- RE: Oil Filters - general, Don Collins, 11:07
- Re: Oil Filters - general, Paul Hunt, 11:03
- Re: No green power, Paul Hunt, 11:01
- RE: Oil Filters - general, Eugene Balinski, 10:39
- Re: The wrong list, JustBrits, 10:27
- Re: British Motor Heritage... to FORD, Charles D. Sorkin, 10:16
- Re: The wrong list, Donald Markham, 10:09
- Re: British Motor Heritage... to FORD, Paul Hunt, 10:01
- RE: Oil Filters - general, Reynolds,John, 09:24
- Is there a market for....., Jeff&Penny Stofko, 09:24
- returning to the list, OKLAHOMA HORSE, 08:48
- MGB Water Pumps FS, Jethogger, 08:19
- Oil Filters - general, Eugene Balinski, 08:00
- Re: TD engine clatter at 3500rpm?, Bud Krueger, 07:31
- Re: Passing NJ emissions with a ..., Dan DiBiase, 07:24
- RE: Fashion Gods Dictate Terminal Ugliness, Dan DiBiase, 07:21
- Re: New Web Page, MGTD1952, 05:59
- Re: Car lists, MGTD1952, 05:38
- Re: sun roof, MGTD1952, 05:27
- Re: TD engine clatter at 3500rpm?, Bill Schooler, 05:11
May 26, 2000
- Re: Replica?, Bullwinkle, 23:58
- RE: New lister, Bullwinkle, 23:37
- Re: Fashion Gods Dictate Terminal Ugliness, Bullwinkle, 23:25
- Re: TF Valve Cover Color, Bullwinkle, 23:22
- Re: TD engine clatter at 3500rpm?, Bullwinkle, 23:19
- Re: Aluminum heads -- spark plug torque, Bullwinkle, 23:17
- Trailer space available OH to No. CA, mga, 22:59
- Re: Fashion Gods Dictate Terminal Ugliness, Bullwinkle, 22:37
- Re: 3-story tall filing cabinet with graphic LCD placards housing 1974 MG, Bullwinkle, 22:13
- RE: Fashion Gods Dictate Terminal Ugliness, Bill Saidel, 20:30
- RE: Bright trim strip, Robert Sexson, 19:40
- Wheel bearings, Peter Schauss, 19:31
- Bing around S.E. PA, David Deutsch, 19:26
- Web Page Links Fixed, Kimo Tichgelaar, 19:01
- Re: Tire Inflation, JustBrits, 18:44
- 77BforSale is Sold, Bud Krueger, 18:37
- Re: Fashion Gods Dictate Terminal Ugliness, JustBrits, 18:35
- Re: Fashion Gods Dictate Terminal Ugliness, JustBrits, 18:33
- Re: New Web Page, JustBrits, 18:27
- Memorial Day -- 1500hours local time -- be there., danray, 18:20
- Re: Fashion Gods Dictate Terminal Ugliness, JustBrits, 18:17
- Re: Fashion Gods Dictate Terminal Ugliness, WSpohn4, 18:06
- Re: Fashion Gods Dictate Terminal Ugliness, Elliott DeGraff, 18:05
- Tire Inflation, Rick Brown, 18:00
- Re: Upcoming weekend, Rick Brown, 17:57
- Re: Anybody notice a lot of hostility in the air lately?, Charles D. Sorkin, 17:48
- RE: Fashion Gods Dictate Terminal Ugliness, Max Heim, 17:24
- RE: New lister, Max Heim, 17:24
- Re: play in connecting rod, British Sportscar Center, 17:10
- Re: Banjo Axle Hub Removal., British Sportscar Center, 17:06
- Sorry if this is tangential - i have a migraine (Was a reply to, Garner, Joseph P., 17:03
- Re: play in connecting rod, Bmgreen, 16:18
- Re: Here I go again, RobMGB, 16:02
- Re: New Web Page, Kimo Tichgelaar, 15:47
- RE: Fashion Gods Dictate Terminal Ugliness, Garner, Joseph P., 15:40
- Re: New Web Page, Geoffrey Gallaway, 15:40
- New Web Page, Kimo Tichgelaar, 15:36
- Re: 3-story tall filing cabinet with graphic LCD placards housing 1974 MG Midget!, Dan DiBiase, 15:33
- Re: Banjo Axle Hub Removal., Dan DiBiase, 15:32
- RE: New lister, Garner, Joseph P., 15:24
- Replica?, Keith Wheeler, 14:55
- The wrong list, Barrie Robinson, 14:46
- Re: Fashion Gods Dictate Terminal Ugliness, Max Heim, 14:45
- Re: 3-story tall filing cabinet etc, Max Heim, 14:45
- Re: 3-story tall filing cabinet etc. [OT], Max Heim, 14:45
- Re: Anybody notice a lot of hostility in the air lately?, DENNIS COX, 14:40
- Re: Fashion Gods Dictate Terminal Ugliness, Geoffrey Gallaway, 14:33
- Re: Fashion Gods Dictate Terminal Ugliness, Ajhsys, 14:19
- Re: Fashion Gods Dictate Terminal Ugliness, Ajhsys, 14:19
- Re: MMM (Million MG March), Ajhsys, 14:19
- Giant Slalom PS, Jack Baker, 14:01
- Re: Fashion Gods Dictate Terminal Ugliness [OT?], Max Heim, 13:40
- Re: All Readers and Listers, Paul Hunt, 13:12
- Re: Fashion Gods Dictate Terminal Ugliness, Kristian Chronister, 13:11
- RE: Fashion Gods Dictate Terminal Ugliness, James Nazarian Jr, 13:08
- Re: MMM (Million MG March), Dave Wood, 13:07
- Re: 3-story tall filing cabinet with graphic LCD placards housing 1974 MG Mid..., James Nazarian Jr, 13:00
- Passing NJ emissions with a ..., Bill Saidel, 12:59
- Re: What size?, Paul Hunt, 12:55
- RE: Fashion Gods Dictate Terminal Ugliness, Garner, Joseph P., 12:54
- Re: 3-story tall filing cabinet with graphic LCD placards housing 1974 MG Mid..., Ajhsys, 12:44
- Re: Here I go again, Ajhsys, 12:44
- Re: 3-story tall filing cabinet with graphic LCD placards housing, Geoffrey Gallaway, 12:40
- Interesting ad, Ajhsys, 12:03
- Re: Fashion Gods Dictate Terminal Ugliness, David Hill, 12:02
- Bright trim strip, Robert Sexson, 11:55
- Re: 3-story tall filing cabinet with graphic LCD placards housing 1974 MG Midget!, Max Heim, 11:40
- Banjo Axle Hub Removal., Dodd, Kelvin, 11:35
- Re: New lister, broken thermostat housing bolt., Max Heim, 11:19
- Re: Upcoming weekend, Larry Macy, 11:05
- Re: Here I go again, Larry Macy, 11:00
- Re: British Motor Heritage... to FORD, Larry Macy, 10:54
- RE: What is a Replica?, Larry Macy, 10:54
- Re: Hello to all, Larry Macy, 10:45
- Carslile vendor?, Brian Warmuth, 10:29
- Re: 74 MGB : where can I get a rear wheel cylinder quickly, Frank Krajewski, 10:28
- Giant Slalom, Jack Baker, 10:27
- Re: Fashion Gods Dictate Terminal Ugliness, Geoffrey Gallaway, 10:24
- Fashion Gods Dictate Terminal Ugliness, Lundy, John D., 10:08
- Re: 3-story tall filing cabinet with graphic LCD placards housing, Geoffrey Gallaway, 10:05
- Re: 3-story tall filing cabinet with graphic LCD placards housing, Geoffrey Gallaway, 09:55
- 3-story tall filing cabinet with graphic LCD placards housing 1974 MG Midget!, wizardz, 09:52
- RE: Aluminum heads -- spark plug torque, Larry Hoy, 09:52
- Re: British Motor Heritage... to FORD, Dan DiBiase, 09:48
- Just some information to all, Jeff&Penny Stofko, 09:47
- Re: Fuel pump?, wcameyer, 09:47
- Re: Anybody notice a lot of hostility in the air lately?, wcameyer, 09:41
- 3-story tall filing cabinet with graphic LCD placards housing 1974 MG Midget!, wizardz, 09:33
- Re: All Readers and Listers, wizardz, 09:15
- Re: Just some information to all, Tab Julius, 09:13
- All Readers and Listers, Dennis Berman, 09:12
- Re: Just some information to all, Ajhsys, 09:06
- Re: 74 MGB : where can I get a rear wheel cylinder quickly, Jim Juhas, 08:56
- RE: New lister, Chris Rose, 08:43
- brake linings, frank.walker, 08:38
- brake linings, frank.walker, 08:37
- Re: New lister, broken thermostat housing bolt., James H. Nazarian, Ph.D., 08:36
- Re: play in connecting rod, Charley & Peggy Robinson, 08:34
- Re: play in connecting rod, WSpohn4, 08:23
- Re: Sheared Bolt, WSpohn4, 08:23
- RE: Fuel pump?, Duinhoven_Hans, 08:19
- Re: play in connecting rod, Lawrie Alexander, 08:13
- Fuel pump?, Brian Warmuth, 08:12
- Re: The story so far, Charley & Peggy Robinson, 08:12
- Re: New lister, ATWEDITOR, 08:10
- Re: New lister, Michael Lupynec, 07:50
- Re: Upcoming weekend, Ajhsys, 07:45
- Re: Anybody notice a lot of hostility in the air lately?, Ajhsys, 07:45
- Re: Upcoming weekend, Ajhsys, 07:45
- Re: New lister, Dave Wood, 07:35
- 74 MGB : where can I get a rear wheel cylinder quickly, Trefor Delve, 07:31
- Re: The story so far, Geoffrey Gallaway, 06:57
- Re: No green power, Ajhsys, 06:52
- Fw: Wreck at Carlisle, 1979MGB, 06:51
- Re: Was Aluminum heads, now thread chaser, Gonaj, 06:34
- Re: Aluminum heads -- spark plug torque, Harlan Jillson, 06:33
- V8 brake pads, Simon.Bosworth (Exchange), 06:29
- Re: Upcoming weekend, Dan Dwelley, 06:20
- Re: Aluminum heads -- spark plug torque, James H. Nazarian, Ph.D., 06:20
- Re: British Motor Heritage... to FORD, Charles D. Sorkin, 06:02
- Re: Anybody notice a lot of hostility in the air lately?, Dan Dwelley, 05:55
- FA: RARE MG MODELS, Michael Carnell, 05:21
- TD engine clatter at 3500rpm?, Roger & Wanda Wilt, 05:02
- play in connecting rod, simon hurley, 04:37
- New lister, Chris Rose, 02:00
- RE: Anybody notice a lot of hostility in the air lately?, Garner, Joseph P., 01:55
- Re: Anybody notice a lot of hostility in the air lately?, James Nazarian Jr, 01:47
- RE: Here I go again, Garner, Joseph P., 01:42
- Re: Aluminum heads -- spark plug torque, James Nazarian Jr, 01:40
- Re: Upcoming weekend, James Nazarian Jr, 01:19
- RE: A funny thing happened at 70 mph, Duinhoven_Hans, 00:29
May 25, 2000
- MGA! copies, Bullwinkle, 23:00
- Re: Upcoming weekend, Bullwinkle, 22:52
- Re: British Motor Heritage... to FORD, Bullwinkle, 22:42
- Re: Was Aluminum heads, now thread chaser, Bullwinkle, 22:26
- Re: Anybody notice a lot of hostility in the air lately?, Steve Conley, 21:18
- A funny thing happened at 70 mph, Steve Conley, 21:08
- Here I go again, David Deutsch, 21:01
- Re: Anybody notice a lot of hostility in the air lately?, Lawrie Alexander, 20:36
- Re: Upcoming weekend, Bud Krueger, 20:27
- Re: Upcoming weekend, JustBrits, 20:06
- Re: Chanpaign, IL show, Barney Gaylord, 19:07
- Re: Aluminum heads -- spark plug torque, Simon Matthews, 17:59
- Re: The story so far, Max Heim, 17:40
- Re: Upcoming weekend, Rick Brown, 17:13
- Re: No green power, Enrique Claure, 17:12
- V8 Marker Lights, Jack Baker, 17:06
- MGF IN NEW JERSEY-UPDATE, Rick Brown, 17:01
- Re: Chanpaign, IL show, LBCarCoMail, 16:59
- Re: Best price for a new top, M. Edwin Vaughan, 16:58
- RE: Still looking for early B roadster, David Councill, 16:32
- Re: Front Marker Light for BGT V8, Max Heim, 15:40
- Re: Best price for a new top, danray, 15:39
- The story so far, Geoffrey Gallaway, 15:27
- Re: Anybody notice a lot of hostility in the air lately?, Kai M. Radicke, 14:24
- Anybody notice a lot of hostility in the air lately?, James H. Nazarian, Ph.D., 14:00
- Re: Car lists, James Nazarian Jr, 13:33
- RE: What is a Replica?, Dodd, Kelvin, 13:32
- Re: British Motor Heritage... to FORD, Paul Hunt, 13:25
- Re: Best price for a new top, Paul Hunt, 13:12
- British Motor Heritage... to FORD, MGMagnette, 13:10
- Re: No green power, Paul Hunt, 13:10
- RE: Upcoming weekend, Bullwinkle, 13:10
- Re: Car lists, WSpohn4, 12:51
- Re: 1 1/2 inch carbs, Bullwinkle, 12:50
- RE: What is a Replica?, Tab Julius, 12:47
- Best price for a new top, John A. Walker, 12:30
- RE: What is a Replica?, Dan DiBiase, 12:21
- Fw: Humour : Reason's why the English language is hard to learn., Paul Hunt, 12:05
- Re: Fw: Shimmy, Paul Hunt, 12:03
- Re: Upcoming weekend, British Sportscar Center, 12:01
- Re: Front Marker Light for BGT V8, Paul Hunt, 12:00
- Re: Chanpaign, IL show, Barney Gaylord, 11:52
- Re: What is a Replica?, Max Heim, 11:40
- Re: Still looking for early B roadster, Max Heim, 11:40
- Cars, cars, cars, Carl Elliott, 11:31
- RE: What is a Replica?, Dodd, Kelvin, 11:01
- Re: Hello to all, Carl Elliott, 10:45
- No green power, Enrique Claure, 10:43
- Re: Aluminum heads, Max Heim, 10:42
- Re: What is a Replica?, Kimo Tichgelaar, 10:42
- RE: Rear Hub Pull-r?, Dodd, Kelvin, 10:09
- RI Emissions Inspection, Steve Bettencourt, 10:00
- Re: Was Aluminum heads, now thread chaser, David Tulchinsky, 09:46
- Re: Car lists, Charley & Peggy Robinson, 09:26
- Rear Hub Pull-r?, Brian Warmuth, 09:13
- Re: Chanpaign, IL show, LBCarCoMail, 09:02
- Re: Car lists, Ajhsys, 08:55
- Re: Was Aluminum heads, now thread chaser, Ajhsys, 08:55
- Re: Upcoming weekend, Ajhsys, 08:55
- Re: Hello to all, Ajhsys, 08:55
- Re: 1 1/2 inch carbs, Lawrie Alexander, 08:19
- Re:Torque, WSpohn4, 08:02
- Re: Still looking for early B roadster, Bruce Burrows, 07:20
- Re: What is a Replica?, Dan DiBiase, 07:10
- Re: Anybody have any experience with these guys?, Solentmg, 06:27
- Re: Car lists, Doug Wilson, 06:22
- Re: Car lists, Brad Pace, 06:18
- Re: Anybody have any experience with these guys?, Mike Razor, 06:15
- Re: Aluminum heads, Chris Kotting, 06:06
- Re: Car lists, Mike Razor, 05:55
- What is a Replica?, Bullwinkle, 04:01
- Re: sun roof, mup1dm, 03:12
- RE: Still looking for early B roadster, Garner, Joseph P., 03:06
- Re: Car lists, Bullwinkle, 02:11
- Re: 1 1/2 inch carbs, Bullwinkle, 01:08
- Re: Car lists, Phil Bates, 00:45
- Re: Was Aluminum heads, now thread chaser, Bullwinkle, 00:22
May 24, 2000
- Car lists, Bullwinkle, 23:48
- Re: Car lists, Tomsaudi, 22:50
- Re: Was Aluminum heads, now thread chaser, Bullwinkle, 22:38
- Re: What size?, Lonn and Rhonda, 22:30
- Re: Was Aluminum heads, now thread chaser, David Ambrose, 22:24
- Re: 52 MG-TD replicar (VW), Phil Bates, 22:13
- MGCCNWC Golf Tournament, Steve Conley, 21:51
- Re: Still looking for early B roadster, David Councill, 21:39
- Re: Hello to all, Steve Conley, 21:37
- Re: Hello to all - Reply, Scotty, 21:19
- RE: 52 MG-TD replicar (VW), Bullwinkle, 21:10
- Re: Aluminum heads / anti seize compound, REwald9535, 21:09
- Re: Aluminum heads, REwald9535, 20:52
- Re: Was Aluminum heads, now thread chaser, REwald9535, 20:23
- Re: Chanpaign, IL show, Barney Gaylord, 19:35
- Re: NUTS !!!!!!!!!, Lawrie Alexander, 19:30
- Re: 61 Buick special on Ebay., Charley & Peggy Robinson, 19:24
- NUTS !!!!!!!!!, alaskabob2, 19:16
- Chanpaign, IL show, Larry Dickstein, 19:08
- Door Panels, N, 18:46
- Hello to all, Jeff&Penny Stofko, 18:41
- Anybody have any experience with these guys?, Charles D. Sorkin, 18:40
- Re: Hello to all, Dan DiBiase, 18:23
- Re: Hello to all, James Nazarian Jr, 17:55
- Aluminum Head Thread, Chris Attias, 17:41
- Re: Shimmy, RobMGB, 17:20
- sun roof, Jim Stuart, 16:45
- Re: aluminum heads revisited., Jim Stuart, 16:12
- Overdrive at last!, Charley & Peggy Robinson, 15:49
- Re: seeing colors, Douglas B. Gaither, 15:24
- Re: Upcoming weekend, Dan DiBiase, 14:30
- Re: Upcoming weekend, Ajhsys, 14:08
- Re: Octain booster and compression ratios, Ajhsys, 12:51
- Re: Upcoming weekend, James Nazarian Jr, 12:34
- Re: Upcoming weekend, Carl French, 12:23
- RE: Aluminum heads, Gordon Bird, 11:55
- Upcoming weekend, Ajhsys, 11:47
- Re: Octain booster and compression ratios, Larry Macy, 11:43
- Re: Octain (sic) booster [OT lead rant], Max Heim, 11:40
- Re: Shimmy, Max Heim, 11:40
- Re: Aluminum heads, Max Heim, 11:40
- Re: NUTS !!!!!, wcameyer, 11:27
- What size?, Douglas B. Gaither, 11:08
- Re: Shimmy, Bob Howard, 10:53
- Re: NUTS !!!!!, Dan Dwelley, 10:11
- Re: Octain booster and compression ratios, Dan Dwelley, 10:07
- Front Marker Light for BGT V8, Jack Baker, 10:07
- V8 Marker, Jack Baker, 09:59
- Re: aluminum heads revisited., Steve Darby, 09:06
- Re: aluminum heads revisited., JustBrits, 09:05
- Re: Octain booster and compression ratios, James H. Nazarian, Ph.D., 09:03
- Re: sun roof, williem, 09:00
- Re: Aluminum heads, Steve Darby, 08:55
- sun roof, Gail Snider, 08:51
- Re: Shimmy, Ajhsys, 08:22
- Re: Was Aluminum heads, now thread chaser, Ajhsys, 08:22
- Re: Octain booster and compression ratios, Ajhsys, 08:22
- Re: aluminum heads revisited., Gonaj, 08:18
- Door Mirror Bases?, Wakefield, Glenn, 08:17
- Re: NUTS !!!!!, Lawrie Alexander, 08:11
- Attn Jersey Guys - MVS Info, Dan DiBiase, 07:49
- Re: sun roof, wizardz, 07:46
- RE: Fw: Shimmy, Larry Hoy, 07:37
- Re: Octain (sic) booster [OT lead rant], Dan Dwelley, 07:17
- Re: Fw: Shimmy, Gonaj, 06:56
- Re: Octain (sic) booster [OT lead rant], James H. Nazarian, Ph.D., 06:53
- Re: oil pumps, Harlan Jillson, 06:46
- NUTS !!!!!, alaskabob2, 06:24
- Re: Octain (sic) booster [OT lead rant], mup1dm, 05:40
- Fw: Shimmy, James Nazarian Jr, 00:55
May 23, 2000
- Re: Aluminum heads, REwald9535, 22:55
- Re: Octain (sic) booster [OT lead rant], Bullwinkle, 22:42
- RE: Aluminum heads, Larry Hoy, 22:29
- Re: Octain booster and compression ratios, Bullwinkle, 22:22
- Re: Aluminum heads / anti seize compound, Bullwinkle, 21:47
- Re: Shimmy, David Councill, 21:42
- aluminum heads revisited., Jim Stuart, 21:29
- Shimmy, Dan DiBiase, 21:10
- oil pumps, Phil Bates, 21:03
- Re: Aluminum heads, Dave Wood, 20:29
- Re: Aluminum heads, REwald9535, 20:01
- Ignition Switch Wiring, Geoffrey Gallaway, 20:00
- Re: Water Pump - on its way out!, Gonaj, 19:36
- Re: Octain booster and compression ratios, David Councill, 17:59
- Re: Octain booster and compression ratios, James H. Nazarian, Ph.D., 16:54
- Re: Octain booster and compression ratios, DENNIS COX, 16:22
- Re: Please read and advice (if possible), David Councill, 15:59
- Re: Octain booster and compression ratios, Philip Schulert, 15:22
- Re: Ignition upgrades, Dave Wood, 15:17
- Re: Please read and advice (if possible), James H. Nazarian, Ph.D., 15:08
- Re: Octain booster and compression ratios, James H. Nazarian, Ph.D., 15:03
- Re: Octain (sic) booster [OT lead rant], James H. Nazarian, Ph.D., 14:45
- Ignition upgrades, Kimo Tichgelaar, 14:15
- Re: Octain (sic) booster [OT lead rant], Barrie Robinson, 13:32
- Octane, WSpohn4, 13:08
- Re: Aluminum heads / anti seize compound, Dan Dwelley, 12:58
- Dixon, Simon Matthews, 12:42
- Re: Aluminum heads, Max Heim, 12:32
- Re: Aluminum heads / anti seize compound, Bob Howard, 12:27
- Re: Starter, dumb question, Bob Howard, 12:16
- Re: Starter, dumb question, Paul Hunt, 12:01
- Re: Aluminum heads, Dan Dwelley, 11:50
- Re: Octain (sic) booster [OT lead rant], Dan Dwelley, 11:45
- Re: door panels, Paul Hunt, 11:44
- Re: Octain (sic) booster [OT lead rant], wcameyer, 11:43
- Re: Aluminum heads, Andrew B. Lundgren, 11:42
- Re: Aluminum heads, Paul Hunt, 11:38
- Aluminum heads, Dave Wood, 11:30
- door panels, Robert Sexson, 11:25
- Re: MG mailing list FAQ, Ajhsys, 10:49
- Around the world to Bishkek in Kyrgystan, John J. Black, 09:55
- Re: Water Pump - on its way out!, Ajhsys, 09:16
- Starter, dumb question, Phillips, Frank, 08:34
- Re: Please read and advice (if possible), Kristian Chronister, 08:29
- Re: MGF in Clinton New Jersey, Dan DiBiase, 07:37
- Re: Octain (sic) booster [OT lead rant], Barrie Robinson, 07:13
- MG mailing list FAQ, Geoffrey Gallaway, 06:57
- Re: Please read and advice (if possible), Bullwinkle, 02:10
- Re: What a day!, Paul Hunt, 01:47
- Re: Water Pump - on its way out!, Paul Hunt, 01:44
- Re: Please read and advice (if possible), Paul Hunt, 01:41
- Re: Indusction Heater WHAT IS IT?, Paul Hunt, 01:36
- Re: Horn and wiper switch question, Paul Hunt, 01:27
- Re: Fuel pump question, Paul Hunt, 01:23
- Water Pump - on its way out ------ THANKS, Dr David McNaughton, 00:26
May 22, 2000
- What a day!, Jim M, 21:01
- Hand break switch?, Enrique Claure, 20:47
- Re: MGF in Clinton New Jersey, JustBrits, 18:16
- Good Weekend for LBC's, Nina Barton, 17:54
- Re: RE: Octain booster and compression ratios, Mike & Kerry Gigante, 17:45
- Re: Octain (sic) booster [OT lead rant], Max Heim, 17:43
- RE: Octain booster and compression ratios, Max Heim, 17:43
- Re: MGF in Clinton New Jersey, Dan Dwelley, 17:30
- 61 Buick special on Ebay., James Nazarian Jr, 17:28
- Re: MGF in Clinton New Jersey, Andrew B. Lundgren, 16:55
- Re: MGF in Clinton New Jersey, Rick Brown, 16:48
- MGF in Clinton New Jersey, Rick Brown, 16:11
- Re: Can't get oil pressure, Barney Gaylord, 15:20
- Re: Please read and advice (if possible), Kristian Chronister, 14:46
- Re: Please read and advice (if possible), Dave Wood, 14:37
- Re: Octain booster and compression ratios, Dave Wood, 14:31
- Re: Water Pump - on its way out!, Dave Wood, 14:24
- RE: Octain booster and compression ratios, Gordon Bird, 14:12
- Re: Water Pump - on its way out!, Andrew B. Lundgren, 13:39
- Re: Octain booster and compression ratios, Dan Dwelley, 13:33
- De Samuel, Hi everybody..., Samuel Perez Toranzo, 13:26
- Re: Water Pump - on its way out!, Geoffrey Gallaway, 13:15
- Water Pump - on its way out!, Dr David McNaughton, 13:03
- Re: Good weekend for LBC's, Max Heim, 12:50
- Re: Octain booster and compression ratios, Max Heim, 12:50
- Re: Good weekend for LBC's, Dan DiBiase, 12:15
- Good weekend for LBC's, DENNIS COX, 11:15
- Around the world on the Tashkent and Morgan news!, John J. Black, 10:20
- Re: Octain booster and compression ratios, Elliott DeGraff, 10:04
- Re: Please read and advice (if possible), Geoffrey Gallaway, 09:14
- Please read and advice (if possible), Dennis Berman, 09:02
- Re: Which cars had the Buick/Olds/Pontiac/Rover V8?, Tab Julius, 08:30
- Can't get oil pressure, abadeker, 08:20
- Re: RE: Octain booster and compression ratios, ATWEDITOR, 08:10
- Re: NJ Inspection Passed!, Dan DiBiase, 07:54
- Re: Where was everyone?, Dan Dwelley, 07:31
- Wreck at Carlisle, 1979MGB, 06:22
- Re: Horn and wiper switch question, James Nazarian Jr, 01:18
- Re: Which cars had the Buick/Olds/Pontiac/Rover V8?, James Nazarian Jr, 01:12
- Re: brit car week, Barney Gaylord, 00:31
- RE: Indusction Heater WHAT IS IT?, Duinhoven_Hans, 00:18
May 21, 2000
- Re: NJ Inspection Passed!, William M. Gilroy, 22:49
- Which cars had the Buick/Olds/Pontiac/Rover V8?, Tab Julius, 21:45
- MGA! copies, Bullwinkle, 21:42
- Horn and wiper switch question, Craig D. Niederst, 20:40
- 77B for Sale, Bud Krueger, 20:32
- Re: CARLISE CAVES IN!!!!, LBCarCoMail, 20:32
- Re: seeing colors, Harlan Jillson, 19:21
- RE: Indusction Heater WHAT IS IT?, Enrique Claure, 18:18
- Re: Fuel pump question, Phil Bates, 16:32
- RE: Fuel pump question, Geoffrey Gallaway, 16:14
- Re: Where was everyone?, frank krajewski, 13:38
- RE: Fuel pump question, Duinhoven_Hans, 13:23
- RE: Indusction Heater WHAT IS IT?, Duinhoven_Hans, 13:16
- Fuel pump question, Enrique Claure, 13:06
- CARLISE CAVES IN!!!!, Rick Brown, 12:57
- Classic car smog inspection, Charles D. Sorkin, 11:34
- Spark Plugs (Late B), Eugene Balinski, 11:21
- Where was everyone?, Dave Houser, 08:01
- Re: Aftermarket wheels, James Nazarian Jr, 01:22
May 20, 2000
- Around the world Samarkand, John J. Black, 22:54
- MGA Close-Ratio gearbox parts, Dave Quirt, 21:49
- Around the world Turkmenistan, John J. Black, 21:09
- Aftermarket wheels, ScotieMac, 20:14
- Indusction Heater WHAT IS IT?, Enrique Claure, 19:27
- RE: Two steps forward, one step back, Steve Shoyer, 19:11
- Two steps forward, one step back, Geoffrey Gallaway, 16:03
- Re: 1954 MGTF 1500 RHD - Its Alive!!!! :-), Charley & Peggy Robinson, 13:13
- NJ Inspection Passed!, Dan DiBiase, 12:09
- Re: identifying fuel pump, Jouke Bloem, 11:39
- 1954 MGTF 1500 RHD - Its Alive!!!! :-), Kevin & Deana Brown, 10:20
- Re: seeing colors, Paul Hunt, 10:08
- Re: seeing colors, Paul Hunt, 10:04
- MGCGT (automatic) FOR SALE, BONNILA, 09:15
- Re: seeing colors, Harlan Jillson, 08:11
- Re: seeing colors, wizardz, 07:25
- Re: British Car Week, Trmgafun, 05:56
- Re: Still looking for early B roadster, Bmgreen, 03:58
May 19, 2000
- Still looking for early B roadster, mga, 22:55
- Re: The Final Test., Carl French, 20:55
- Hiding your MG Magnette from us? Bad boy, bad., MGMagnette, 20:51
- Alternator Problems 77B, Bud Krueger, 19:27
- Re: seeing colors, Max Heim, 18:59
- Re: Testing..., AH1962SP, 17:28
- RE: MG with Nissan B-210 motor, Garner, Joseph P., 15:55
- MGs and other stuff for sale, David Deutsch, 15:55
- Re: '65 motor and trany question, Max Heim, 13:41
- The Final Test., Dan DiBiase, 13:39
- RE: fuel pump misbehaviour, Garner, Joseph P., 13:25
- Beaulieu Garage, Paul Hunt, 13:06
- Laws of physics vs MGB, Paul Hunt, 13:06
- Re: Another question re: MG with Nissan B-210 motor, Max Heim, 12:56
- Re: MG with Nissan B-210 motor, Max Heim, 12:56
- Re: identifying fuel pump, Paul Hunt, 12:21
- Re: fuel pump misbehaviour, Paul Hunt, 12:15
- '65 motor and trany question, Joe7670, 12:09
- Re: Another question re: MG with Nissan B-210 motor, Paul Hunt, 12:07
- seeing colors, Rollie BROWN, 10:06
- Re: MG with Nissan B-210 motor, Bob Howard, 10:01
- Re: LBC guy buys BIG BC, Peter C., 09:38
- Re: LBC guy buys BIG BC, Lonn and Rhonda, 09:25
- Re: MG with Nissan B-210 motor, Dan DiBiase, 09:07
- Another question re: MG with Nissan B-210 motor, Joe7670, 08:59
- MG with Nissan B-210 motor, Joe7670, 08:26
- Testing..., Dan DiBiase, 07:02
- Carlisle PA vendor site ID.s, wizardz, 06:10
- RE: Slightly Offtopic: Pictures of BGT's, jon.arikstad, 02:14
- fuel pump misbehaviour, Garner, Joseph P., 01:00
May 18, 2000
- Re: LBC guy buys BIG BC, Tomsaudi, 22:55
- Slightly Offtopic: Pictures of BGT's, Geoffrey Gallaway, 22:42
- Re: hood, AH1962SP, 21:51
- RE: LBC guy buys BIG BC, Keith Wheeler, 21:34
- [no subject], Larry, 21:12
- re:MGB/C rear axle question, Mowog1, 17:47
- TEST, MGRagtop, 16:47
- Re: LBC guy buys BIG BC, Rick Brown, 16:08
- Re: Clutch parts, Geoffrey Gallaway, 14:21
- Clutch parts, James Nazarian Jr, 13:37
- RE: identifying fuel pump, Dodd, Kelvin, 13:13
- Re: New Iistmember - Contemplating '76 Midget, Ajhsys, 13:12
- Re: rubber bumper, Paul Hunt, 13:02
- Re: New Iistmember - Contemplating '76 Midget, Dan Dwelley, 12:55
- Re: Lucas Says Keep Running!, Paul Hunt, 12:51
- Re: front spring question - 1973 BGT ??, Paul Hunt, 12:48
- Re: Figuring out the wires, Paul Hunt, 12:45
- identifying fuel pump, Jouke Bloem, 12:41
- Re: MGB/C rear axle question, James Nazarian Jr, 12:09
- Fw: too lean, Paul Hunt, 11:58
- Fw: timing info wanted, Paul Hunt, 11:57
- New Iistmember - Contemplating '76 Midget, Wvcruffler, 11:57
- Fw: BMH, Paul Hunt, 11:57
- Re: Octain booster and compression ratios, Ajhsys, 11:33
- RE: LBC guy buys BIG BC, Garner, Joseph P., 10:58
- Re: rubber bumper, Michael Blair, 10:02
- Re: Octain booster and compression ratios, Peter C., 09:31
- Re: Octain booster and compression ratios, DENNIS COX, 09:28
- Re: rubber bumper, Geoffrey Gallaway, 09:06
- RE: rubber bumper, Gordon Bird, 09:02
- Fw: Help needed, George Re, 08:12
- rubber bumper, Rollie BROWN, 07:59
- [Fwd: [Fwd: Re: 74 MGB fs (maine)]], Charley & Peggy Robinson, 07:48
- RE: Octain booster and compression ratios, Gordon Bird, 06:56
- Help needed, George Re, 06:49
- TEST POST, George Re, 06:39
- Re: MGB/C rear axle question, Bill Schooler, 05:11
- MGB/C rear axle question, Keith Wheeler, 01:39
- RE: test, Duinhoven_Hans, 00:12
May 17, 2000
- RE: LBC guy buys BIG BC, Don Collins, 22:53
- Re: LBC guy buys BIG BC, Geoffrey Gallaway, 22:43
- LBC guy buys BIG BC, Tomsaudi, 22:12
- Re: Octain booster and compression ratios, David Councill, 21:23
- Re: Octain booster and compression ratios, BobMGT, 19:59
- Column cowl differences, Enrique Claure, 19:23
- Re: Carlisle, Rick Brown, 17:36
- test, James Nazarian Jr, 17:34
- Re: The right link for the ATW pictures Phew!, Dave Wood, 16:21
- The right link for the ATW pictures Phew!, John J. Black, 15:38
- Around the world Pictures, John J. Black, 15:23
- Re: air filter for HIF<SZ conversion, John H. Reynolds, 15:16
- Around the world or 44 hours on a boat!, John J. Black, 15:02
- RE: front spring question - 1973 BGT ??, Larry Hoy, 14:03
- Re: Around the world or 44 hours on a boat!, Ajhsys, 13:56
- RE: air filter for HIF<SZ conversion, Bill Saidel, 13:07
- RE: air filter for HIF<SZ conversion, Steve Shoyer, 12:40
- Re: Fw: front spring question - 1973 BGT ??, Charley & Peggy Robinson, 10:27
- Re: wire wheel conversion, Charley & Peggy Robinson, 09:44
- Dixon show and swap meet, DENNIS COX, 09:37
- Re: Carlisle, Barrie Robinson, 07:45
May 16, 2000
- Re: Twin Cam Brakes, Dave Quirt, 22:16
- Re: Octain booster and compression ratios, REwald9535, 22:01
- Re: front spring question - 1973 BGT ??, Carl Elliott, 20:33
- Top, N, 19:02
- MGB-GT, DLancer7676, 18:27
- Re: Carlisle, Jethogger, 18:14
- Figuring out the wires, Tim Economu, 18:07
- Re: Valve timing, REasterby, 17:39
- Re: Lewes DE Show, REasterby, 17:29
- Painting, Rhbuxton, 17:19
- Format, WSpohn4, 17:00
- Re: Carlisle, Rick Brown, 16:56
- MGA Coupe Windshield Seal, Dave Houser, 16:09
- Re: Strangest looking Lucas part I've ever seen, Kevin Sullivan, 15:59
- Re: front spring question - 1973 BGT ??, Carl Elliott, 15:50
- Re: Lucas, Carl Elliott, 15:47
- RE: front spring question - 1973 BGT ??, James Nazarian Jr, 14:52
- Re: Figuring out the wires, James Nazarian Jr, 14:38
- Re: front spring question - 1973 BGT ??, James Nazarian Jr, 14:33
- Re: BMH, David Littlefield, 14:02
- Re: BMH, Ajhsys, 13:50
- Figuring out the wires, Geoffrey Gallaway, 13:17
- BMH, Steve Darby, 12:07
- Re: Valve timing, Dave Wood, 11:54
- Re: Lucas, William M. Gilroy, 11:34
- Lewes DE Show, Michael Blair, 10:38
- Twin Cam Brakes, Wayne H. Francis, 10:17
- Subject: Dixon swap meet.. Who all is going?, Nina Barton, 10:12
- Valve timing, Simon.Bosworth (Exchange), 09:15
- Re: Lucas, Ajhsys, 08:55
- Re: Carlilse bound, Frank Krajewski, 08:16
- Re: Carlilse bound, Dan Dwelley, 07:15
- Carlisle Need MGB Trunk, Jethogger, 06:20
- parts, Carl Elliott, 06:20
- Carlisle, Jethogger, 06:14
- RE: Engine breathing & battery fit, Duinhoven_Hans, 05:28
- around the world into Azerbaijan, John J. Black, 00:18
May 15, 2000
- Re: hood, HLYDOC, 20:17
- Prothane or Energy Suspension???, REasterby, 20:06
- Spridget Newsletter, Mike & Kerry Gigante, 19:48
- RE: Engine breathing & battery fit, Garner, Joseph P., 19:31
- Carlilse bound, Jack Emery, 19:27
- Re: Engine breathing & battery fit, JustBrits, 19:00
- RE: Engine breathing & battery fit, Garner, Joseph P., 18:17
- Re: Lucas, Solentmg, 17:55
- Lucas, Carl Elliott, 17:47
- Re: Octain booster and compression ratios, Max Heim, 17:20
- Re: Engine breathing & battery fit, wizardz, 16:05
- Re: wire wheel conversion, Max Heim, 15:41
- RE: Engine breathing & battery fit, Duinhoven_Hans, 15:04
- Re: Top, Ajhsys, 14:52
- Re: Carlisle, Dave Houser, 14:44
- Re: Top, wcameyer, 14:23
- Octain booster and compression ratios, DENNIS COX, 14:17
- Dixon swap meet.. Who all is going?, DENNIS COX, 14:12
- BS-Whitworth, Steve Darby, 13:19
- wire wheel conversion, Matt Gaetke, 13:16
- HS carb breather pipe orifice size, wizardz, 12:51
- RE: Engine breathing & battery fit, Garner, Joseph P., 12:23
- MG Car Club of Western NY, Lane Broughton, Dodd, Kelvin, 12:11
- Re: Top, Blake Wylie, 11:50
- Re: Top, Max Heim, 11:41
- Re: Fwd: LBC (but not Spridget) help, Bob Howard, 11:38
- Re: Finding black grounding points, Enrique Claure, 11:20
- Fw: front spring question - 1973 BGT ??, wizardz, 10:56
- Re: RE: which side up?, Paul Hunt, 10:20
- Re: parking brake start, heater valve, Paul Hunt, 10:18
- Re: Lucas Says Keep Running!, Paul Hunt, 09:59
- Lucas Square 8 lamps, Tim Economu, 09:58
- Top, Frank Krajewski, 09:46
- Re: Hard Starting, Paul Hunt, 09:40
- Re: Head Gasket? Valves? Rings?, wcameyer, 09:39
- Re: front spring question - 1973 BGT ??, Paul Hunt, 09:32
- Re: sir Lucas Says Keep Running-Part 2, Ajhsys, 09:17
- Re: Finding black grounding points, Paul Hunt, 09:07
- Fwd: LBC (but not Spridget) help, Larry Macy, 08:56
- hood, AH1962SP, 08:51
- front spring question - 1973 BGT ??, wizardz, 06:51
- no mail..is there a problem?, Charles D. Sorkin, 06:00
- RE: sir Lucas Says Keep Running-Part 2, Duinhoven_Hans, 00:13
May 14, 2000
- Colorado Trip Looking for events, Your Name, 21:23
- Re: sir Lucas Says Keep Running-Part 2, Robert C. Galli, 20:50
- Around the world to another rest day and a 5.30 am start., John J. Black, 19:37
- Re: Trouble Installing TD Oil Pan, BobMGT, 19:33
- Re: sir Lucas Says Keep Running-Part 2, frank krajewski, 19:12
- sir Lucas Says Keep Running-Part 2, Dave, 18:52
- timing info wanted, Bill Saidel, 17:13
- Re: Carlisle, Rick Brown, 16:35
- Re: Carlisle, Rick Brown, 16:30
- Engine breathing & battery fit, Duinhoven_Hans, 15:40
- RE: Lucas Says Keep Running!, Duinhoven_Hans, 15:17
- RE: new tires, Duinhoven_Hans, 15:08
- Lewes Delaware Show, REasterby, 14:21
- General Questions: Compression, Oil Usage,, Kris Chronister, 13:14
- Lucas Says Keep Running!, Dave, 10:44
- Re: Carlisle, LBCarCoMail, 09:32
- Carlisle, frank krajewski, 07:58
- Mothers Day, j r overcash, 06:35
- Re: ACK!!!, Dr David McNaughton, 03:12
- Re: Virus again, Tab Julius, 00:02
May 13, 2000
- Carlisle, Craig D. Niederst, 22:48
- Re: For your amusement.., MGMagnette, 22:36
- For your amusement.., Geoffrey Gallaway, 22:29
- London Roadster - (still) looking for info, Steve Shoyer, 20:33
- London Roadster - looking for info, Steve Shoyer, 20:30
- Virus again, Barrie Robinson, 20:03
- Virus again, Barrie Robinson, 19:54
- Finding black grounding points, Enrique Claure, 19:07
- Hard Starting?, Douglas B. Gaither, 18:35
- Hard Starting, Douglas B. Gaither, 18:29
- no mail..is there a problem?, John J. Black, 12:45
- Re: Head Gasket? Valves? Rings?, James H. Nazarian, 10:35
- Re: #%$@&* SAE Bolts Forced into a TD Block, David Ambrose, 09:21
- Re: #%$@&* SAE Bolts Forced into a TD Block, Lawrie Alexander, 09:11
- #%$@&* SAE Bolts Forced into a TD Block, BobMGT, 08:52
- Horn and wiper switch question, Craig D. Niederst, 08:10
- RE: Alternator, j r overcash, 05:05
- Around the world and leaving Turkey, John J. Black, 01:12
May 12, 2000
- Re: Alternator, Carl Elliott, 20:17
- 75-MGB FOR SALE, runriver, 18:48
- ACK!!!, Carl French, 16:07
- Re: Long drive, Bob Howard, 16:06
- Re: Long drive, Bob Howard, 15:34
- Re: J-B Weld, is it really that good?, Barney Gaylord, 15:24
- Re: Alternator, Dave Wood, 15:07
- Re: new tires, James Nazarian Jr, 15:00
- new tires, Robert.Reid, 14:52
- too lean, Bill Saidel, 13:57
- Re: RE: which side up?, ATWEDITOR, 13:48
- carpet kit, James Nazarian Jr, 13:40
- Around the world, John J. Black, 13:28
- Re: She's a smoker., wizardz, 13:08
- Head Gasket? Valves? Rings?, wcameyer, 11:38
- firewall, Carl Elliott, 11:31
- Re: Cracked head!!, Andrew B. Lundgren, 10:26
- Alternator, Geoffrey Gallaway, 09:55
- RE: Porting and Polishing a 1800cc Head, Chris Attias, 09:50
- Re: J-B Weld, is it really that good?, Bill Saidel, 09:16
- Re: Long drive, Kristian Chronister, 09:01
- Cracked head!!, (Scott Regel), 08:59
- Re: Right Hand Drive in the US, Anthony Woodruff, 08:56
- Re: Long drive, Carl French, 08:52
- Re: Long drive, Frank Krajewski, 08:50
- Re: MGB U-Joint Prices?, Gary R Hacker, 07:16
- Right Hand Drive in the US, Brinkman, Gerardo V, 07:12
- Re: Sound deadening, mup1dm, 05:42
- Re: which side up?, Dan Dwelley, 05:42
- Long drive, Carl French, 05:33
- RE: which side up?, Gordon Bird, 05:10
- Re: which side up?, James Nazarian Jr, 00:24
May 11, 2000
- Re: Strangest looking Lucas part I've ever seen, Trevor Boicey, 23:49
- Re: Strangest looking Lucas part I've ever seen, Ian & Liz, 23:44
- Re: Steering wheel nut size, Alex Baroiant, 22:54
- Steering wheel nut size, Craig D. Niederst, 22:33
- RE: Strangest looking Lucas part I've ever seen, James Gambony, 21:48
- RE: Strangest looking Lucas part I've ever seen, Phil Vanner, 20:18
- Re: Right Hand Drive in the US, Larry Macy, 19:53
- Re: lbc's in Cornwall, Ont., Trevor Boicey, 19:48
- lbc's in Cornwall, Ont., Andrew Proudfoot, 19:42
- parking brake start, heater valve, Jim Stuart, 19:39
- Re: MGB Heater Water Control Valve - Bad Engineering and Design, mgb72, 18:54
- Re: Strangest looking Lucas part I've ever seen, JustBrits, 18:22
- Re: Right Hand Drive in the US, Geoffrey Gallaway, 18:12
- Re: Strangest looking Lucas part I've ever seen, Charles D. Sorkin, 18:08
- Re: Right Hand Drive in the US, Carl Elliott, 17:57
- Porting and Polishing a 1800cc Head, kcmgb, 17:44
- Re: Right Hand Drive in the US, Rick Brown, 17:14
- MGB U-Joint Prices?, danray, 17:07
- Re: Strangest looking Lucas part I've ever seen, AH1962SP, 16:31
- Re: J-B Weld, is it really that good?, Barney Gaylord, 16:02
- Right Hand Drive in the US, Jerry Greenberg, 15:38
- which side up?, Dave Houser, 14:55
- RE: MGB Heater Water Control Valve - Bad Engineering and Design, Duinhoven_Hans, 14:47
- Re: Strangest looking Lucas part I've ever seen, Larry Macy, 14:45
- Strangest looking Lucas part I've ever seen, cdsorkin, 14:31
- Strangest looking Lucas part I've ever seen, cdsorkin, 14:30
- Re: MGB Heater Water Control Valve - Bad Engineering and Design, Bruce Burrows, 14:18
- Re: Sound deadening, Larry Macy, 14:14
- Re: Sound deadening, James Nazarian Jr, 13:46
- Re: Wiring, Paul Hunt, 13:36
- Re: MGB Heater Water Control Valve - Bad Engineering and Design, Paul Hunt, 13:31
- Re: RV8 Test Drive, Eric, 12:38
- Re: Right Hand Drive in the US, Dave Wood, 12:36
- RE: Right Hand Drive in the US, Dodd, Kelvin, 12:36
- Re: Right Hand Drive in the US, randell s Kegg, 12:23
- Re: 1972 MIDGET, AH1962SP, 11:42
- Wiring, Robert Sexson, 11:30
- Re: Sound deadening, John J. Black, 11:27
- RE: Firewall, Gordon Bird, 11:19
- Re: Firewall, Dan Dwelley, 10:12
- Re: MGB Heater Water Control Valve - Bad Engineering and Design, Max Heim, 09:40
- Re: Sound deadening, Larry Macy, 09:34
- Re: Sound deadening, Larry Macy, 09:23
- Re: Education Commences, Ajhsys, 09:17
- Re: Right Hand Drive in the US, Harlan Jillson, 09:00
- Re: 1972 MIDGET, Dan DiBiase, 08:54
- Right Hand Drive in the US, Anthony Woodruff, 08:38
- Re: Floor pan installation prices, Anthony Woodruff, 08:29
- RE: Funny Noise when Braking Hard, Andrew B. Lundgren, 08:11
- Re: Tach reads high, David Littlefield, 08:11
- Re: MGB Heater Water Control Valve - Bad Engineering and Design, David Littlefield, 08:08
- Re: MGB Heater Water Control Valve - Bad Engineering and Design T O HOT!, Bob Howard, 07:56
- Re: MGB Heater Water Control Valve - Bad Engineering and Design, Bob Howard, 07:31
- J-B Weld, is it really that good?, BobMGT, 07:06
- Re: Sound deadening, Jones, Mark, 06:53
- Re: It lives (part 2), Bob Howard, 06:53
- Firewall, Carl Elliott, 05:53
- Rear Shock upgrade, Carl Elliott, 05:45
- Re: Checking the coil, Chris Kotting, 05:31
- RE: MGB Heater Water Control Valve - Bad Engineering and Design T, Duinhoven_Hans, 00:26
May 10, 2000
- Floor pan installation prices, Craig D. Niederst, 21:48
- RE: Parking Brake Start, Steve Shoyer, 21:39
- Re: MGB Heater Water Control Valve - Bad Engineering and Design, wcameyer, 20:45
- Parking Brake Start, Tom Wagner, 20:40
- Education Commences, Lundy, John D., 19:33
- Re: Odd item on E-bay - Targa Top, Kai M. Radicke, 19:30
- Re: Odd item on E-bay - Targa Top, Lawrie Alexander, 19:12
- re: frame pads and shop prices, Charles D. Sorkin, 18:35
- Coil 101, Michael E. Blair, 18:30
- MGB Heater Water Control Valve - Bad Engineering and Design, N, 17:43
- Tach reads high, Carl French, 17:06
- Re: Galli's 78B, Dan DiBiase, 16:04
- Re: The Pits, Dan DiBiase, 16:00
- Re: MGA performance improvement, Barney Gaylord, 15:52
- The Pits, David Hill, 15:41
- Re: Seeking seat trimmer in UK, David Hill, 15:30
- Re: Question about fuel additive-VSR, Barrie Robinson, 15:30
- Re: ROVER SOLD!!! for 10 quid!, MGMagnette, 15:06
- Re: Sound deadening, ATWEDITOR, 14:14
- Re: Seeking seat trimmer in UK, Paul Hunt, 13:43
- Re: ROVER SOLD!!! for 10 quid!, Paul Hunt, 13:40
- fwd: Apology to Motorhead!, (Scott Regel), 13:24
- Re: Galli's 78B, Paul Hunt, 13:22
- Re: Galli's 78B, David Deutsch, 13:17
- Re: Checking the coil?, Paul Hunt, 13:10
- Re: Funny Noise when Braking Hard, Paul Hunt, 13:04
- Re: waxol, Paul Hunt, 12:38
- Re: Slow turn signals, Paul Hunt, 12:36
- RE: Odd item on E-bay - Targa Top, John Steczkowski, 12:34
- Re: Question about fuel additive-VSR, Paul Hunt, 12:33
- Re: Norwegian GT owner / clutch seats and other., Paul Hunt, 12:23
- Re: Odd item on E-bay - Targa Top, James Nazarian Jr, 12:21
- Odd item on E-bay - Targa Top, Anthony Woodruff, 12:11
- Re: Sub Frame Pad? (longish), James Nazarian Jr, 11:59
- Re: Question about fuel additive-VSR, Max Heim, 11:40
- Re: Sub Frame Pad?, Max Heim, 11:40
- Re: Sound deadening, James Nazarian Jr, 11:37
- Around the world (Istanbul), John J. Black, 11:36
- It runs at last! & oil pressure, Charley & Peggy Robinson, 11:16
- It lives (part 2), Carl French, 11:10
- RE: Sound deadening, Larry Macy, 11:07
- Re: Valve Job on 70 B, Charley & Peggy Robinson, 10:44
- Re: Sound deadening, David Lynes, 09:00
- re: frame pads and shop prices, spontius, 08:46
- Re: Maryland MG Clubs, Dan, 08:45
- Re: oil consumption, James H. Nazarian, Ph.D., 08:27
- MGA performance improvement, McCarroll Edwin, 08:25
- Re: Maryland MG Clubs, Dan Dwelley, 08:17
- RE: Galli's 78B, O'Brien, Patrick F, ALCOO, 08:00
- RE: Sound deadening, Reynolds,John, 07:56
- Re: Sound deadening, ATWEDITOR, 07:47
- Checking the coil?, Tim Economu, 07:37
- Re: VIBRATION !!!!!!!!!!!!, Geoffrey Gallaway, 07:27
- Re: Galli's 78B, Dan DiBiase, 07:21
- re: frame pads and shop prices, (Scott Regel), 07:21
- Re: Vanity Plates, James H. Nazarian, Ph.D., 06:50
- Re: Is this vapor lock?, James H. Nazarian, Ph.D., 06:28
- Re: Checking the coil, Charles D. Sorkin, 05:52
- Re: Sound deadening, Jones, Mark, 05:50
- Re: Maryland MG Clubs, Dan, 05:32
- Re: VIBRATION !!!!!!!!!!!!, Gonaj, 05:24
- Re: Haynes Manual, Gonaj, 05:17
- RE: Checking the coil?, Duinhoven_Hans, 00:29
May 09, 2000
- VIBRATION !!!!!!!!!!!!, alaskabob2, 23:19
- Re: Haynes Manual, James Nazarian Jr, 23:09
- Re: Checking the coil?, Barney Gaylord, 22:50
- Seeking seat trimmer in UK, mga, 22:06
- Re: Checking the coil?, David Councill, 21:36
- Re: Maryland MG Clubs, Elliott DeGraff, 20:39
- Re: Checking the coil?, Carl Elliott, 20:06
- Re: Galli's 78B, Carl Elliott, 20:05
- Re: Reference Books, RobMGB, 19:49
- carlisle, Susan and John Roper, 19:35
- Haynes Manual, Rhbuxton, 19:24
- Maryland MG Clubs, Michael E. Blair, 19:07
- Re: Maryland MG Clubs, Michael P. Ohleger, 19:06
- re: compression numbers, Calvin Krug, 18:35
- Galli's 78B, Robert C. Galli, 18:21
- '69 GT for sale, NOT MINE!, Andrew B. Lundgren, 18:13
- Checking the coil?, Michael E. Blair, 18:04
- RE: Funny Noise when Braking Hard, Glenn Schnittke, 17:46
- Re: Reference Books, Rick Brown, 17:42
- Re: Lottery, Rick Brown, 17:38
- Re: Wanted: Left rear spring hanger for 70BGT, Carl Elliott, 17:32
- Re: ROVER SOLD!!! for 10 quid!, MGMagnette, 16:51
- Re: ROVER SOLD!!! for 10 quid!, Leckstein, 16:38
- Re: Reference Books, Trevor Boicey, 16:32
- Maybe $600 was too much, Erin Matzen, 16:25
- Reference Books, Lundy, John D., 16:09
- Funny Noise when Braking Hard, BobMGT, 14:16
- Re: More on Rover Sold, Paul Hunt, 14:07
- Re: BMIHT, Paul Hunt, 13:59
- Re: Timing question, Paul Hunt, 13:40
- Re: Sound deadening, Enrique Claure, 13:13
- Lottery, Eric, 13:09
- Re: RV8 Test Drive, Eric, 12:42
- Wanted: Left rear spring hanger for 70BGT, Geoffrey Gallaway, 12:29
- Re: Midget Left Me Yesterday, Kristian Chronister, 12:25
- Re: Midget Left Me Yesterday, Larry Macy, 12:13
- Midget Left Me Yesterday, Mike Cook, 12:05
- Re: MGB GT Rally Car, Ajhsys, 11:42
- Re: MGB GT Rally Car, Ajhsys, 11:36
- Re: Question about fuel additive-VSR, Bruce Burrows, 11:19
- valve job, Johnmowog, 11:17
- valve openings, Johnmowog, 11:12
- Re: Lottery, Ajhsys, 11:07
- More on Rover Sold, MGMagnette, 10:53
- Questions re Dixon CA show, mga, 10:53
- ROVER SOLD!!! for 10 quid!, MGMagnette, 10:39
- Re: MGB GT Rally Car, Larry Macy, 10:35
- Re: RV8 Test Drive, Neil Cotty, 10:06
- Sound deadening, Carl French, 10:02
- Re: BMIHT, LBCarCoMail, 09:48
- Re: Question about fuel additive-VSR, Dave Wood, 09:41
- Re: Proper Care for Enamel Paint, Ajhsys, 08:47
- Re: MGB GT Rally Car, Ajhsys, 08:47
- RV8 Test Drive, Neil Cotty, 08:46
- Question about fuel additive-VSR, Scotty, 08:43
- Re: Sub Frame Pad?, Bob Howard, 08:02
- Re: MGB GT Rally Car, Dan DiBiase, 07:59
- Sub Frame Pad?, (Scott Regel), 06:41
- Re: MGB GT Rally Car, ATWEDITOR, 06:04
- RE: Compression Numbers, Duinhoven_Hans, 00:02
May 08, 2000
- RE: Proper Care for Enamel Paint, Dodd, Kelvin, 23:54
- RE: Proper Care for Enamel Paint, Dodd, Kelvin, 23:53
- Proper Care for Enamel Paint, Tomsaudi, 23:17
- RE: MGB GT Rally Car, Dodd, Kelvin, 22:19
- Re: MG Rocks 2000, SpuriousV8, 21:58
- Re: waxol, Geoffrey Gallaway, 21:58
- MGB GT Rally Car, Keith Wheeler, 21:04
- Re: 1972 MIDGET, AH1962SP, 20:54
- 1972 MIDGET, AH1962SP, 20:49
- Fw: Rebuilding the bottom half of an engine..., Michael Lupynec, 19:47
- Re: BMIHT, Max Heim, 19:40
- Re: MGA 1600 Mk1 for sale - Sydney, REasterby, 19:34
- Re: BMIHT, Michael Lupynec, 19:26
- waxol, Robert Sexson, 18:53
- Re: BMIHT, Dan DiBiase, 18:33
- Re: What did Abingdon do during the War?, Pearson, Tim, 17:26
- BMIHT, David Councill, 17:23
- Re: changing switches, Dave Wood, 17:01
- Re: woodpeckers and fuel filters-NO PUMP, Eric, 16:59
- Rebuilding the bottom half of an engine..., Andrew B. Lundgren, 16:31
- Re: J-B Weld, is it really that good?, Larry, 15:09
- Updated events page Eastern North America, David Deutsch, 14:53
- changing switches, Steve Krane, 14:46
- Re: Timing Light??, Carl Elliott, 14:38
- Re: Pushrod question.., Barney Gaylord, 14:30
- Re: Final bugs before inspection, Paul Hunt, 14:04
- Re: Pushrod question.., Charley & Peggy Robinson, 14:00
- Re: Compression Numbers, Paul Hunt, 13:57
- RE: Compression Numbers, John J. Black, 13:57
- Re: Blinking license plate lights, Paul Hunt, 13:45
- Re: Compression Numbers, Max Heim, 13:40
- Re: Speed bumps (was a Towing Question), Paul Hunt, 13:30
- Re: Compression Numbers, Michael Lupynec, 13:12
- Re: Compression Numbers, Michael Lupynec, 12:23
- Re: Steel Bonnet Blues, Eric, 12:22
- MGA with 302 engine, Simon Matthews, 12:18
- RE: Problem solved for the moment? and a Towing question (Was An, Dodd, Kelvin, 12:16
- Re: MGA 1600 Mk1 for sale - Sydney, Eric, 12:15
- Re: Compression Numbers, Dave Wood, 11:58
- fwd: Re: Timing Light??, (Scott Regel), 11:46
- Re: Compression Numbers, Michael Lupynec, 11:37
- Around the world week 2 and leaving Europe, John J. Black, 11:13
- Re: Timing Light??, Max Heim, 10:53
- Re: What did Abingdon do during the War?, Bob Howard, 10:38
- Run on control valve, Michael Blair, 10:01
- Re: Compression Numbers, Dave Wood, 09:52
- Re: I POLN8, Max Heim, 09:40
- Re: Timing Light??, wcameyer, 09:36
- Re: Timing Light??, DENNIS COX, 09:35
- RE: Compression Numbers, Duinhoven_Hans, 08:38
- MGA 1600 Mk1 for sale - Sydney, Neil Cotty, 08:36
- Re: was; speaking of brakes/rear wheel lock - resolved, Lawrie Alexander, 08:28
- Norwegian GT owner / clutch seats and other., jon.arikstad, 08:27
- Re: Compression Numbers, Lawrie Alexander, 08:21
- Re: Timing Light??, Bill Saidel, 08:14
- Re: Timing Light??, David Littlefield, 08:01
- Re: Timing Light??, Craig Brownlee, 07:58
- Re: Timing Light??, 1979MGB, 07:52
- RE: Timing Light??, (Scott Regel), 07:52
- RE: Timing Light??, Gordon Bird, 07:46
- was; speaking of brakes/rear wheel lock - resolved, Gordon Bird, 07:44
- Timing Light??, (Scott Regel), 07:40
- Timing question, Jones, Mark, 07:21
- Re: Final bugs before inspection, Dave Wood, 00:38
- RE: Final bugs before inspection, Duinhoven_Hans, 00:27
- RE: Blinking license plate lights, Duinhoven_Hans, 00:16
- RE: Slow turn signals, Duinhoven_Hans, 00:09
- RE: Compression Numbers, Duinhoven_Hans, 00:07
- RE: Slooooooooow turn signal, Duinhoven_Hans, 00:04
May 07, 2000
- Final bugs before inspection, Geoffrey Gallaway, 22:40
- Blinking license plate lights, Enrique Claure, 21:10
- Re: I POLN8, Tab Julius, 21:00
- Re: What did Abingdon do during the War?, MGMagnette, 19:50
- Re: What did Abingdon do during the War?, Neil Cotty, 19:47
- Re: Cleaning a slimy engine, MGMagnette, 19:47
- What did Abingdon do during the War?, Charles D. Sorkin, 19:46
- Re: I POLN8, MGTD1952, 19:02
- South Jersey Show, Rick Huber, 18:25
- Pushrod question.., Blake Wylie, 18:18
- Re: Distributor Wobble Question, David Hill, 18:07
- Hard Top 63-67 MG Midget, Erin Matzen, 17:55
- Re: I POLN8, Max Heim, 17:40
- Re: Rear spring mount information, Max Heim, 17:40
- Slow turn signals, Dave Wood, 17:28
- Re: Compression Numbers, British Sportscar Center, 16:27
- Re: Compression Numbers, Bill Schooler, 16:20
- Compression Numbers, kcmgb, 15:43
- Re: I POLN8, AH1962SP, 15:25
- Rear spring mount information, Geoffrey Gallaway, 14:24
- woodpeckers and fuel filters-NO PUMP, Bill Saidel, 14:14
- Valve Job on 70 B, kcmgb, 13:20
- Re: (Lawrie) Low oil pressure, Max Heim, 13:00
- Steering column cowl, Enrique Claure, 12:57
- woodpeckers and fuel filters, Bill Saidel, 12:50
- RE: My Ad (with additions, incl. SU's), Dan, 12:34
- Re: My Message?, Dan, 11:12
- Re: Slooooooooow turn signal, Larry Dickstein, 10:59
- Re: Slooooooooow turn signal, Paul Hunt, 10:11
- My Message?, Dan, 10:00
- Re: Odd question for tall people, Paul Hunt, 09:58
- Re: Low oil pressure, Max Heim, 09:41
- Re: Distributor Wobble Question, Paul Hunt, 09:36
- Re: Reference Books - Practical Classics, MGTD1952, 09:11
- Re: air filter for HIF<SZ conversion, Lawrie Alexander, 09:04
- Re: (Lawrie) Low oil pressure, Lawrie Alexander, 09:01
- Re: transmission lockupboundary="------------C49C23F2206F9314F4E2056B", Charley & Peggy Robinson, 08:41
- Re: Low oil pressure, Charley & Peggy Robinson, 08:30
- Re: next step in bros 64 sprite (paint), AH1962SP, 08:06
- Re: (Lawrie) Low oil pressure, Bruce Burrows, 08:02
- next step in bros 64 sprite (paint), AH1962SP, 07:46
- Re: Millicent & Sheila's Excellent Adventure, Chuck Young, 07:43
- RE: Slooooooooow turn signal, Enrique Claure, 07:15
- Re: Distributor Wobble Question, Bill Schooler, 06:03
- Re: air filter for HIF<SZ conversion, Don Walton, 05:57
- air filter for HIF<SZ conversion, Bill Saidel, 05:30
- Re: transmission lockup, James Nazarian Jr, 02:45
- RE: Slooooooooow turn signal, Duinhoven_Hans, 01:14
May 06, 2000
- Re: Distributor Wobble Question, Baker, G., 23:53
- Transmission lock up, John J. Black, 22:36
- Millicent & Sheila's Excellent Adventure, Sheila Stokes-Begley, 21:56
- Re: Is this vapor lock?, Steve Conley, 21:48
- Slooooooooow turn signal, Enrique Claure, 21:06
- Is this vapor lock?, Michael E. Blair, 20:22
- Re: Low oil pressure, Lawrie Alexander, 19:59
- Re: vac advance, Lawrie Alexander, 19:56
- Re: transmission lockup, Max Heim, 19:40
- Reference Books - Practical Classics, David Mrozinski, 19:35
- Re: Sound deadening, Larry, 18:14
- Sad TD on eBay, Bud Krueger, 17:52
- Re: Odd question for tall people, wcameyer, 17:29
- vac advance, Carl French, 17:28
- Re: Vanity Plates, Robert Alan Reisse, 16:52
- Steel Bonnet Blues, Eric, 16:42
- Re: MGF in Oz-Give away!-URL & Advert, Eric, 16:23
- I POLN8, Barrie Robinson, 16:20
- Re: MGTD Rattle, Bob Howard, 16:00
- Re: Low oil pressure - MGA, Bruce Burrows, 14:30
- Re: Low oil pressure - MGA, Barney Gaylord, 13:55
- Re: Steel Bonnet Blues, Max Heim, 13:41
- Re: Low oil pressure, Max Heim, 13:41
- Selling my MGB, Dan, 12:43
- transmission lockup, Andrew D. Zimmerman, 10:51
- Around the world results day 5, John J. Black, 10:36
- Low oil pressure, Brad Pace, 10:18
- Re: Low oil pressure, Brad Pace, 09:53
- RE: Odd question for tall people, Dan DiBiase, 09:33
- Re: Butchered MGA, Dan DiBiase, 09:30
- Re: Vanity Plates, Tab Julius, 08:28
- Re: Cleaning a slimy engine with over cleaner, Brad Pace, 07:24
- Re: Cleaning a slimy engine prior to painting., Charley & Peggy Robinson, 06:51
- Re: MGF in Oz-Give away!-URL & Advert, Charley & Peggy Robinson, 06:48
- Re: Clean My Engine Bay!, Brad Pace, 06:25
- Low oil pressure, Brad Pace, 06:20
- Re: Vanity Plates, MGTD1952, 03:53
May 05, 2000
- Re: Odd question for tall people, Max Heim, 21:41
- Re: Cleaning a slimy engine prior to painting., Brad Pace, 21:32
- Re: Odd question for tall people, AH1962SP, 20:58
- Re: Clean My Engine Bay!, AH1962SP, 20:57
- Re: Odd question for tall people, Kevin D Richards, 20:34
- Re: My Rear is Dripping, Christopher Reichle, 20:27
- Butchered MGA, Simon Matthews, 19:53
- RE: Odd question for tall people, Ernest S., 17:37
- Re: MGTD Rattle, Christopher Reichle, 17:19
- Re: Odd question for tall people, Andrew B. Lundgren, 16:54
- How to install buzzer, Enrique Claure, 16:36
- Cleaning an Engine before...., Enrique Claure, 16:34
- MGTD Rattle, Mike Razor, 15:52
- RE: Odd question for tall people, Garner, Joseph P., 15:50
- Re: Cleaning a slimy engine prior to painting., JustBrits, 15:45
- Re: Speed bumps (was a Towing Question), JustBrits, 15:43
- Re: Cleaning a slimy engine with over cleaner, Valerie Stabenow, 15:14
- Re: Problem solved for the moment? -- now speed bumps, Christopher Reichle, 14:44
- Re: Odd question for tall people, wcameyer, 14:29
- Re: Odd question for tall people, David Ambrose, 14:17
- Re: Odd question for tall people, Tab Julius, 14:16
- Re: Odd question for tall people, Michael Jose, 14:15
- Odd question for tall people, Geoffrey Gallaway, 14:13
- Re: How to install buzzer, AH1962SP, 13:48
- Re: Vanity Plates - a long essay follows...., Bob Howard, 13:42
- Re: Thoughts on this virus deal..., Max Heim, 13:41
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), Max Heim, 13:41
- Re: Problem solved for the moment? -- now speed bumps, Bob Howard, 13:27
- Speed bumps (was a Towing Question), Speedo79, 13:24
- Re: Cleaning a slimy engine prior to painting., Geoffrey Gallaway, 13:23
- A silver lining for Rover, Paul Hunt, 13:12
- Re: Vanity Plates, AH1962SP, 13:04
- RE: Thoughts on this virus deal..., Gordon Bird, 12:48
- Re: Thoughts on this virus deal..., Dave Wood, 12:47
- Re: Beware of "I Love You" Virus-Reply, Paul Hunt, 12:29
- Thoughts on this virus deal..., tomas pokrefke, 12:29
- Re: Vanity Plates...ignore the first one!, (Scott Regel), 12:23
- Re: Vanity Plates, (Scott Regel), 12:22
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), Dave Wood, 12:19
- Re: Cleaning a slimy engine prior to painting., Dave Wood, 12:12
- RE: No Brake Lites, John J. Black, 12:05
- Re: Cleaning a slimy engine prior to painting., Max Heim, 11:42
- Re: My Rear is Dripping, Max Heim, 11:42
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), wcameyer, 11:37
- Re: Vanity Plates, Tab Julius, 11:04
- Vanity Plates, Geoffrey Gallaway, 10:53
- Re: My Rear is Dripping, Bob Howard, 10:37
- Re: Cleaning a slimy engine prior to painting., AH1962SP, 10:21
- Re: Clean My Engine Bay!, AH1962SP, 10:17
- No Brake Lites, Tim Economu, 10:11
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), David Littlefield, 09:57
- Around the world day 4 of 80, John J. Black, 09:49
- My Rear is Dripping, Anthony Woodruff, 09:16
- Re: Thoroughbred & Classic Cars Article on Twincams, WSpohn4, 08:33
- Re: MGF in Oz-Give away!-URL & Advert, Tab Julius, 08:17
- Re: Cleaning a slimy engine prior to painting., Jim Juhas, 08:07
- Thanks, got my historic tags!, Michael Blair, 08:05
- Re: MGF in Oz-Give away!-URL & Advert, Dan DiBiase, 07:52
- Re: "basket case" title? (MD), ATWEDITOR, 07:21
- Re: mystery elect. connector, Dan Dwelley, 07:20
- Re: MGF in Oz-Give away!-URL & Advert, Scotty, 07:19
- How to get cured...sort of... (was beware of I love you), Dan Dwelley, 07:10
- Re: Clean My Engine Bay!, Elliott DeGraff, 07:10
- Re: Clean My Engine Bay!, Ajhsys, 07:06
- RE: Bent Bonnet Pix, Larry Hoy, 06:56
- Re: mystery elect. connector, Speedo79, 01:31
- Re: Distributor Wobble Question, Barney Gaylord, 01:24
- Re: Tires, Max Heim, 00:19
May 04, 2000
- Clean My Engine Bay!, Tomsaudi, 22:25
- Butchered MGA, Larry, 21:36
- 77 MGB for sale in Dallas, AnnWebbTX, 21:02
- Re: [Fwd: Historic Plates -Reply], Kevin & Deana Brown, 20:31
- Re: Tires, Phil Bates, 20:24
- Re: Distributor Wobble Question, Max Heim, 19:41
- Re: Distributor Wobble Question, Max Heim, 19:41
- Re: Bent Bonnet Pix, Max Heim, 19:40
- Re: Whahappened?, Max Heim, 19:40
- Re: Tires, Carl French, 19:37
- Tires, Don & Donna K., 19:35
- Re: "basket case" title? (MD), David Sylvain, 19:32
- RE: Problem solved for the moment? and a Towing question (Was An Introduction), Larry Hoy, 19:21
- It lives!!! (so far), Carl French, 19:10
- mystery elect. connector, Erich, 18:10
- Bent Bonnet Pix, Eric, 17:41
- Re: "basket case" title? (MD), Elliott DeGraff, 17:16
- Re: Distributor Wobble Question, JustBrits, 17:14
- MGF in Oz, Eric, 16:58
- Re: Beware of "I Love You" Virus-Reply, Scotty, 16:55
- Re: Distributor Wobble Question, Barney Gaylord, 15:15
- Re: Bent Bonnet Pix, Eric, 14:13
- Distributor Wobble Question, BobMGT, 13:35
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), Paul Hunt, 13:17
- Re: Timing, Paul Hunt, 12:59
- Re: Beware of "I Love You" Virus, Paul Hunt, 12:30
- RE: Problem solved for the moment? and a Towing question (Was An, Dodd, Kelvin, 12:27
- Around the world rally results day 3, John J. Black, 12:17
- Re: Beware of "I Love You" Virus, Mike Razor, 11:13
- Re: The magical adventures of Millicent, Pointparty, 11:04
- Re: Bent Bonnet Pix, Dave Wood, 10:30
- The magical adventures of Millicent, Tim Economu, 10:27
- Re: Bent Bonnet Pix, Ajhsys, 10:24
- Re: "basket case" title? (MD), Ajhsys, 10:24
- RE: "basket case" title? (MD), Lambdin, Mike, 10:06
- Re: "basket case" title? (MD), ATWEDITOR, 09:51
- Re: Cleaning a slimy engine prior to painting., Dan Dwelley, 09:41
- The story so far with a 70 BGT, Geoffrey Gallaway, 09:23
- Re: Lansing, MI -> DC Transport..., Adam Arabian, 09:13
- Re: Lansing, MI -> DC Transport..., Tony Woodruff, 09:13
- Beware of "I Love You" Virus, Dan Dwelley, 09:07
- No Brake Lites, mistebar, 09:01
- Re: Cleaning a slimy engine prior to painting., AH1962SP, 08:52
- Re: No Brake Lites, Bob Howard, 08:47
- Re: Cleaning a slimy engine prior to painting., Brad Pace, 08:39
- '65 MGBs FS, johnf, 08:31
- Re: Stupid MG tricks, Larry Macy, 08:27
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), Ajhsys, 08:25
- Re: Cleaning a slimy engine prior to painting., Ajhsys, 08:25
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), Larry Macy, 08:25
- Re: The dreams of youth......, Chris Spenceley, 08:21
- Re: Cleaning a slimy engine prior to painting., Mike G., 08:07
- "basket case" title? (MD), Adam Arabian, 07:37
- Re: The magical adventures of Millicent, Carl Elliott, 06:39
- Re: Whahappened?, eric, 06:28
- Lansing, MI -> DC Transport..., Adam Arabian, 06:22
- RE: Midgets under semis <WAS> Problem solved for the moment?, Chris Kotting, 06:20
- Re: Cleaning a slimy engine prior to painting., Gonaj, 06:10
- Stupid MG tricks, Carl French, 04:14
May 03, 2000
- The magical adventures of Millicent, Sheila Stokes-Begley, 23:43
- RE: Problem solved for the moment? and a Towing question (Was An Introduction), Ernest S., 22:12
- Re: Whahappened?, Charley & Peggy Robinson, 20:21
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), Dan DiBiase, 20:05
- Re: Problem solved for the moment? and a Towing question (Was An Introduction), Max Heim, 19:41
- Re: Cleaning a slimy engine prior to painting., Max Heim, 19:41
- Re: Timing, Max Heim, 19:41
- Re: Electric MGA with big money backing, Max Heim, 19:41
- Re: Aston [sic] Mini, Max Heim, 19:41
- Re: Documentation for and MGB and the manufacturer., Max Heim, 19:41
- Re: Electric MGA with big money backing, Max Heim, 19:41
- Re: Cleaning a slimy engine prior to painting., Elliott DeGraff, 18:24
- Re: Whahappened?, RobMGB, 18:23
- Butchered MGA, Larry, 17:05
- Looking for a Maintenance Free Battery, Tim Economu, 16:45
- RE: The dreams of youth......, Garner, Joseph P., 16:42
- Problem solved for the moment? and a Towing question (Was An Introduction), Ernest S., 16:39
- Cleaning a slimy engine, Larry, 16:32
- Re: The dreams of youth......, Dan DiBiase, 16:19
- RE: The dreams of youth......, Dan Pockrus, 16:04
- Cleaning a slimy engine prior to painting., Andrew B. Lundgren, 15:43
- Re: Whahappened?, Chuck Young, 15:36
- O-rings for guages, Barrie Robinson, 15:32
- Re: The dreams of youth......, Ajhsys, 15:17
- Re: Whahappened?, James Nazarian Jr, 15:04
- Re: Head retorquing, Dave Wood, 14:48
- Timing, Robert Sexson, 14:34
- The dreams of youth......, Tony Woodruff, 14:19
- Re: Electric MGA with big money backing, Larry Macy, 14:16
- Non-ignition electrics 101. [RE: An Introduction], Garner, Joseph P., 14:03
- Re: Whahappened?, Paul Hunt, 13:23
- Re: An Introduction, Andrew B. Lundgren, 13:14
- Re: Whahappened?, Barney Gaylord, 13:13
- Re: Fw: Alternator Woes, Paul Hunt, 13:06
- Head retorquing, EMPcoLWE, 13:05
- Re: Electric MGA with big money backing, Barney Gaylord, 13:05
- Re: Documentation for and MGB and the manufacturer., Paul Hunt, 12:54
- Re: An Introduction, Ajhsys, 12:51
- Re: Aston [sic] Mini, Paul Hunt, 12:49
- Documentation for and MGB and the manufacturer., Michael Blair, 12:29
- RE: Documentation for and MGB and the manufacturer., Gordon Bird, 12:14
- Around the world, John J. Black, 11:15
- Re: Electric MGA with big money backing, Simon Matthews, 11:04
- Re: Electric MGA with big money backing, Max Heim, 11:01
- Re: An Introduction, wcameyer, 09:39
- Re: Looking for a Maintenance Free Battery, David Littlefield, 09:32
- An Introduction, Ernest S., 09:10
- RE: Name this part?, David Councill, 08:21
- RE: Whahappened?, Duinhoven_Hans, 07:39
- Re: Whahappened?, Chris Kotting, 07:33
- RE: Whahappened?, Duinhoven_Hans, 06:58
- Whahappened?, Chris Kotting, 06:46
- Re: Ebay, Chris Kotting, 06:45
- New Jersey/Pennsylvania (no LBC content, and late as usual), Feldman, Jack (Jack), 06:36
- Re: Re: TD Clutch Cable VS Clutch Levers, Bob Howard, 05:28
- Re: Electric MGA with big money backing, Gonaj, 02:24
- Re: radios, noise suppression for, Gonaj, 02:19
- RE: Name this part?, Duinhoven_Hans, 00:18
May 02, 2000
- Was Alternator Woes is Battery discussion., Tim Economu, 23:57
- Re: Web site update, Lawrie Alexander, 23:00
- Re: Ebay, Trevor Boicey, 23:00
- Re: Fw: Alternator Woes, REwald9535, 22:35
- Re: Electric MGA with big money backing, Barney Gaylord, 22:25
- Re: Electric MGA with big money backing, Barney Gaylord, 22:13
- Web site update, David F. Darby, 22:11
- Re: Electric MGA with big money backing, David F. Darby, 21:56
- RE: Mikuni Carb, REwald9535, 21:51
- Re: Aftermarket Wheels, MGALUVR, 21:19
- RE: Looking for a Maintenance Free Battery, Steve Shoyer, 20:58
- Re: Aston [sic] Mini, Max Heim, 20:48
- Re: Aston Mini, Lawrie Alexander, 20:19
- Looking for a Maintenance Free Battery, BobMGT, 19:51
- Re: Aftermarket Wheels, Max Heim, 19:40
- Re: Electric MGA with big money backing, MGTD1952, 19:32
- Aston Mini, Robert Sexson, 19:21
- Re: Electric MGA, Charles D. Sorkin, 18:43
- James Nazarian I can't reach you, Pete Ryner, 17:51
- Re: Ebay, Elliott DeGraff, 17:17
- Jensen Healey, Brad Pace, 17:15
- RE: Mikuni Carb, Dodd, Kelvin, 16:25
- Re: Mikuni Carb, David Deutsch, 15:57
- Re: NAMGBR, David Deutsch, 15:45
- Re: radios, noise suppression for, Bob Howard, 15:28
- Re: Ebay, mrayborn, 15:27
- Fw: Alternator Woes, Tim Economu, 15:13
- Re: Electric MGA with big money backing, Ajhsys, 15:08
- Mikuni Carb, Michael Blair, 15:05
- Aftermarket Wheels, Michael Blair, 15:04
- Re: Electric MGA with big money backing, Dan DiBiase, 14:41
- Re: radios, noise suppression for, Bob Howard, 14:26
- RE: Name this part?, j r overcash, 14:22
- Re: TD Clutch Cable VS Clutch Levers, Bob Howard, 14:16
- Carlisle in September, Feldman, Jack (Jack), 14:15
- Re: Electric MGA with big money backing, Tab Julius, 13:56
- Re: Name this part?, Bob Howard, 13:55
- Re: Electric MGA with big money backing, Kevin Sullivan, 13:42
- Re: Name this part?, Paul Hunt, 13:20
- Re: Alternator Woes, Paul Hunt, 13:15
- Re: [Re: Another body work question -- advice, please!], Paul Hunt, 13:10
- Electric MGA with big money backing, Barney Gaylord, 13:04
- Re: URGENT: 3 & 4 cylinder filling up, Paul Hunt, 12:34
- Red CBB Sighting...., Dan DiBiase, 12:32
- Re: Timing guide for newbie, Paul Hunt, 12:31
- Re: radios, noise suppression for, Paul Hunt, 12:23
- Re: Please help me find my short!, Paul Hunt, 12:21
- Re: I flunked electronics 101, help please, Paul Hunt, 12:09
- Re: [Re: Another body work question -- advice, please!], Matthew Trebelhorn, 11:53
- Re: Autocross games, cams, and HIF carbs, Paul Hunt, 11:49
- Alternator Woes, Tim Economu, 11:45
- Re: radios, noise suppression, Larry Macy, 11:40
- Re: radios, noise suppression for, Max Heim, 11:40
- radios, noise suppression, Tim Economu, 11:40
- Re: Alternator Woes, Speedo79, 10:47
- Around the world results Day 1 of 80, John J. Black, 10:30
- Re: Name this part?, Dan Dwelley, 09:00
- Re: NAMGBR, LBCarCoMail, 07:58
- fwd: Re: Transmission?!, (Scott Regel), 07:46
- Re: Name this part?, Brad Pace, 07:31
- Re: radios, noise suppression for, Harlan Jillson, 06:52
- NAMGBR, Ken Waringa, 06:47
- Ebay, Carl French, 06:34
- Re: Alternator Woes, Chris Kotting, 05:41
- Alternator Woes, Speedo79, 00:46
- RE: Name this part?, Duinhoven_Hans, 00:30
- RE: Around the world in 80 days (old news?), Duinhoven_Hans, 00:19
May 01, 2000
- Re: Name this part?, Dave Wood, 23:23
- TD Clutch Cable VS Clutch Levers, BobMGT, 21:49
- Name this part?, Sheila Stokes-Begley, 21:46
- Re: Fw: Metal Thickness, Gonaj, 21:15
- Re: radios, noise suppression for, David Councill, 21:04
- midget lug nuts, Chris Spenceley, 20:33
- midget lug nuts, Chris Spenceley, 19:40
- Re: Carlisle 2001???? was: MG COUNCIL OF NA - MEETING, Rick Brown, 17:14
- july car show, AH1962SP, 16:40
- Re: Cleaning a slimy engine prior to painting., Larry, 16:37
- RE: Westminster MG Museum, j r overcash, 15:29
- RE: Around the world in 80 days (old news?), John J. Black, 15:26
- Re: Fw: Metal Thickness, Max Heim, 15:12
- RE: Around the world in 80 days (old news?), David Councill, 13:38
- Around the world in 80 days (old news?), Adam Arabian, 13:10
- Re: My Classic MGB Club, Larry Macy, 12:56
- Fw: Metal Thickness, 1979MGB, 12:32
- Re: My Classic MGB Club, Kevin Sullivan, 12:25
- My Classic MGB Club, Mike G., 12:18
- Re: Bugeye floormats, Michael Lupynec, 10:02
- Re: Bugeye floormats, Michael Lupynec, 09:51
- Re: Alchemy and Rover - All The News, Paul Hunt, 09:48
- Re: $#%^&@ Front Tonneau Snaps, Paul Hunt, 09:36
- Re: Painting wire wheels....., Ajhsys, 09:35
- RE: Gaskets, Duinhoven_Hans, 09:15
- RE: Gaskets, Gordon Bird, 09:04
- Swap Meet in Portland, Dave Wood, 09:04
- RE: Gaskets, Duinhoven_Hans, 08:53
- Re: Another Timing Question, Lawrie Alexander, 08:47
- Re: Date to Remember - long report, Larry Macy, 08:47
- RE: Gaskets, Gordon Bird, 07:52
- Re: Westminster MG Museum, Alan Claffie, 07:47
- Transmission?!, (Scott Regel), 07:40
- OD replies, Gary R Hacker, 07:29
- Re: MG Rocks 2000, 1979MGB, 06:48
- Re: Another Timing Question, Bob Howard, 06:06
- Re: GO GO GO 77B, Steve Conley, 00:49