mgb-v8
[Top] [All Lists]

FW: Factory MGB V8 pads

To: "MG V8 List" <mgb-v8@autox.team.net>
Subject: FW: Factory MGB V8 pads
From: "Larry Hoy" <larryhoy@prodigy.net>
Date: Thu, 13 Apr 2000 18:59:00 -0600
Importance: Normal
Reply-to: "Larry Hoy" <larryhoy@prodigy.net>
Sender: owner-mgb-v8@autox.team.net

-----Original Message-----
From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
Behalf Of Dodd, Kelvin
Sent: Wednesday, April 12, 2000 1:24 PM
To: 'Paul Hunt'
Cc: 'mgs@autox.team.net'
Subject: RE: Factory MGB V8 pads


Paul:

        The V8 caliper appears to have a locator to prevent the pad from
being installed backwards.  The pad will fit a standard MGB caliper, and has
been used by many in the UK as an improvement over stock.  Unfortunately the
pad will fit either way in a regular B caliper causing damage to the pads.
We had to handle a customer complaint on this one, which is why I am now
aware of the problem.  I'm not familiar with using them in an MGA, so am
interested to know if they will fit.

Kelvin.

> -----Original Message-----
> From: Paul Hunt [mailto:paul.hunt1@virgin.net]
> Sent: Wednesday, April 12, 2000 11:23 AM
> To: Larry Hoy; PAUL D KILE; MG V8 List
> Subject: Re: Factory MGB V8 pads
> 
> 
> I find they only go in one way.  If the stock MGA pads aren't 
> handed I would
> be suspicious that the V8 pads are not good to use.  Dunno 
> about 'left' and
> 'right' pads, more like 'inner' and 'outer'.  A pair of pads 
> for the RHS is
> identical to a pair for the LHS.  I have a set of Unipart 
> (GBP242) which I
> have photographed showing the 'handedness' and how the 
> anti-squeal shims are
> attached.  Two of the pads are stamped with 'FER2449FGG453' 
> and two with
> 'FER2449FGG462'.  The latter two have a white paint mark on 
> the pad material
> adjacent o the straight edge of the backing plate.  You can 
> see the picture
> at http://www.mgb-stuff.org.uk/v8pads.htm
> 
> PaulH.
> 
> ----- Original Message -----
> From: Larry Hoy <larryhoy@prodigy.net>
> To: PAUL D KILE <Paul.Kile@Aerojet.com>; Paul. Hunt1@Virgin. Net
> <paul.hunt1@virgin.net>; MG V8 List <mgb-v8@Autox.Team.Net>
> Sent: Tuesday, April 11, 2000 10:31 PM
> Subject: Factory MGB V8 pads
> 
> 
> > A friend of mine asked me the following question, I was 
> unable to answer.
> I told him I'd see what
> > this list said.
> >
> > He has determined that the factory MGB V8 front brake pads 
> will fit in his
> stock MGA calipers.
> > But looking at the pads he noticed they are "handed".  
> Trouble is, which
> pad goes on which side?
> > Any suggestions?
> >
> > Larry Hoy
> > http://pages.prodigy.net/larryhoy/
> >
> 

<Prev in Thread] Current Thread [Next in Thread>