Thanks John. Do you recommend leaning one or two flats?
Larry
----- Original Message -----
From: "John Seim" <kingseim@earthlink.net>
To: "Lawrence Karpman" <lkarpman@tx.rr.com>
Cc: "MG" <mg-t@autox.team.net>
Sent: Tuesday, April 14, 2009 7:11 PM
Subject: Re: [Mg-t] Air Cleaner Compensation
> That is how I set them.
> The size of the air pipe supplying the two carbs is not twice the
> area of the 1 1/4 opening, so not as much air flow occurs.
>
> John Seim
> Irvine, CA
>
> On Apr 14, 2009, at 4:30 PM, Lawrence Karpman wrote:
>
>> I've read in several places that on the late TD with the oil bath
>> air cleaner, that the mixture should be leaned out a flat or two
>> after carb tuning to compensate for the reduced air flow of the oil
>> bath cleaner which, after it is re-installed, will result in the
>> mixture being too rich.
>>
>> I know some of these air cleaner tops are mashed down from
>> overtightening, but mine is not. I'd appreciate the thoughts of the
>> group.
>>
>> TIA
>>
>> Larry _______________________________________________
>>
>> Support Team.Net http://www.team.net/donate.html
>>
>> Mg-t@autox.team.net
>> http://autox.team.net/mailman/listinfo/mg-t
>>
>> Archives at http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|