Bill asked:
>Am I in need of a new pump and/or gasket? Do you recommend rebuilt or new.
If rebuilt, from whom?<
Bill,
Are you positive it's the water pump? The studs that hold it in place are
open to the water gallery and are prone to leak unless they're sealed with
loctite or plumbers putty. Are you sure you've tightened the nuts holding
the water pump in place?
I've had no problems with Moss or Abingdon pumps - other than the casting is
a little long and can rub on the back of the pulley unless you grind it
down.
As to having yours rebuilt - there's Joe Curto on the east coast and Phil
Marino on the west.
Best of luck,
Gene Gillam
Saucier, MS
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|