Thanks to fellow listers Pinky's electrical gremlin has been calmed (for now).
I have a hunch that I may be lacking fuel pressure at the carbs. I have an
electric fuel pump located on the frame. It feeds into an inline gas filter -
out to about a 5/8" fuel line - into another inline filter (I need to remove
this but before I changed the hard fuel lines and coated the gas tank I had a
lot of rust) then into a =" or so fuel line to the carbs. It doesn't appear
that I get good flow to the second filter. Would a too large fuel hose
contribute to a lack of fuel pressure?
Chris Brucciani
Marietta, GA
1968 2000 "Pinky"
1973 240Z
Check out Arch's new and improved 'Fresh.Thinking.' website at
www.archinsurance.com
--------------------------------------------------------
The information contained in this e-mail message may be privileged and
confidential information and is intended only for the use of the individual
and/or entity identified in the alias address of this message. If the reader
of this message is not the intended recipient, or an employee or agent
responsible to deliver it to the intended recipient, you are hereby requested
not to distribute or copy this communication. If you have received this
communication in error, please notify us immediately by telephone or return
e-mail and delete the original message from your system.
|