Re: Re- The first drive and Clu

[lupienj@wal.hp.com (John Lupien)]

>      I had a similar experience mating the tranny to my Spridget
> engine.  I rotated the input shaft on the transmission slightly, 
> and that let the splines line up with the pressure plate -- 
> voila!  It sounds pretty simple but it took me a while to figure 
> it out.

If there's a medium-convenient way to get the box popped into gear,
the easy way to alter the input shaft orientation is to put it in
gear and turn the output shaft while jiggling the trans into place.

-- 
---
John R. Lupien
lupienj@wal.hp.com