Hi Jeff,
Thanks for the quick response!
>According to the diagram, the regulator connects
> that to ground through 2 resistors (and decides how much to charge the
> battery, I guess). I measured the resistance from that connection on my
> 18ACR alternator and got about 3000 ohms.
I just measured from the regulator input spade to ground and got an open
circuit (over a mega-ohm) to ground. When I plugged in the output wire and
field supply wires (big brown and small brown/yellow) I measured 70 Ohms from
regulator input to ground. Kind of strange I think. Maybe I'll just pull the
cover off and see what there is to see.
Kendall
|