Dick,
Thanks for looking into this - you have made it farther than I have! I called
around and found the pump at Napa, but the pressure regulator has been
recalled. I don't know what the defect was, but I thought I would pass it on to
the list in case anybody is using one (Balkamp(Napa) and Purolator appear to be
the same thing).
Jay
On Monday, February 17, 2003, at 11:01PM, Sally or Dick Taylor
<tr6taylor@webtv.net> wrote:
>Jay---Hold off on trying to wire the electronic fuel pump ground wire to
>the oil pressure switch. The Purolater (and other) pumps write that you
>can and should do this, but I tested this installation instruction
>advice, and I don't believe it can be done this way with the TR. Due to
>the unique wiring of the TR in this area, the oil pressure switch is
>closed when no oil pressure is sensed. Thus, grounding the pump to the
>pressure switch would mean the pump would only run when the engine
>isn't!
>
>I'll ask DANMAS is there is a way to do this.
>
>Sorry for not checking this out better before posting.
>
>Dick
|