Thanks Phil,
When I did the first design I didn't want to label it as a TR-6 Cover
because it would also fit a 250 and a several other models that share
the same engine. I completely forgot about the fact that it would fit a,
2.0L, GT-6 as well.
I had really hoped that some of the GT-6 guys would have gotten in on
the rockers. It would have been a good test!
By all means tell one, tell all...I can use all the advertising I can
get.
Jim Swarthout
-----Original Message-----
Subject: RE: New Designs
Jim,
Spitfire/GT6 "Lurker"/TR6 Admirer posting here...
I also love the newly added designs. As a nice GT6 rocker cover is hard
to
find, I am excited about the possibilities here, and am glad to see a
non-2.5L "labeled" cover available in the future. I will cross post
over to
the NASS and Spit6GT6 groups, as well. Don't think you'd mind extra
advertising. ;-)
Phil
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net]On
Behalf Of Jim Davis
Sent: Wednesday, February 12, 2003 5:30 PM
To: 'Jim Swarthout'; 6pack@autox.team.net
Subject: RE: New Designs
Jim,
The designs are beautiful!
I've got a couple of questions and please understand I know nothing of
the design or manufacturing process for these valve covers.
1)Is the polishing process that labor intensive ($290 difference or 6
times the unpolished cover)?
2)Are the blue and black colors painted (powder coated) on or is the
color impregnated, as in the anodized look? Would other colors, such as
red or yellow be available?
Jim Davis
Fortson, GA
CF38690UO
CF37325U
Based on popular opinion I have added some new Valve Cover designs.
Have a look when you get the chance.
http://web.tampabay.rr.com/tr6tech
Best regards,
Jim Swarthout
|