6pack
[Top] [All Lists]

Re: Getting ready to restore...

To: "TR6 list" <6pack@autox.team.net>
Subject: Re: Getting ready to restore...
From: "Gary Fluke" <res0s0t7@verizon.net>
Date: Wed, 16 Oct 2002 21:03:06 -0700
Joe,

I don't know about where you live, but in the Seattle area you can buy a
very decent TR6 for $8,000-10,000 ready to go.


Gary
'73 CF10801U

----- Original Message -----
From: Andrew Packard <apackard@triad.rr.com>
To: 'Joe Rich' <jrich@attbi.com>; 6pack (E-mail) <6pack@autox.team.net>
Sent: Wednesday, October 16, 2002 8:10 PM
Subject: RE: Getting ready to restore...


> Remember, nothing is truly "free".
> In your shoes, I would decide what I wanted out of the car: A) A British
car show award winner; B) A fun little driver for great sunny days, or; C)
turn it around quickly and try to make a buck.  If you choose 'C', sell it
now before you put any money into it.  Does it have Overdrive?  That alone
would be worth over $750.  If you choose 'A', be sure you anticipate a
$25,000 budget to get it perfect.  If you choose 'B', for about
$8,000-$10,000 you could get a fun little car put together, with some
effort.  The "How to Restore a TR5/TR6" would be a great book to get to help
you get started.  Good luck with your "free" car!
> Andy
> 68 TR250
>
> -----Original Message-----
> From: Joe Rich [SMTP:jrich@attbi.com]
> Sent: Wednesday, October 16, 2002 10:21 PM
> To: 6pack (E-mail)
> Subject: Getting ready to restore...
>
> I received a 76 TR6 for free from a friend. The car is mechanically sound
> (good compression, starts right up ((ANSA exhaust sounds very cool))) but
> visually unappealing as the interior has been removed (and lost), with a
> little rust on the frame all the way in the back under the trunk. It does
> need new floor boards, however the quarters are a fiberglass replacement
> (so, no rust there) type. I don't know the condition of the suspension but
> the car was parked in a barn for eight years so I can imagine. The brakes
> were frozen as was the clutch pedal but they seem to be working now.
>
>
> I've done some reading, watched this board, did a little internet research
> and I'm going to get some books. I guess my question is... if you had to
do
> it all over again would you, and what would you do differently?
>
>
> Thanks
>
>
> Joe
>
> '76 TR6 in utero

<Prev in Thread] Current Thread [Next in Thread>