Check this web page out, http://www.por15.com/faqs/por15faq.html, it
contains product description, application, and other FAQs
>From: corey.sherman@rcn.com
>Reply-To: corey.sherman@rcn.com
>To: Don Malling <dmallin@attglobal.net>
>CC: 6-Pack <6pack@autox.team.net>, "mgs@autox.team.net"
><mgs@autox.team.net>, owner-6pack@autox.team.net
>Subject: Re: POR-15 min temperature
>Date: Tue, 1 Oct 2002 21:11:40 -0400
>
>I checked both POR-15 corporate website, and a reseller's
>(http://www.porstore.com/faq.htm) but to no avail. It would be reasonsible
>to assume that similar conditions like many other paints should be present
>- humidity and temperature being the major factors.
>
>Painting Temperature
>When using latex be sure that the temperature is above 50 degrees F. It is
>difficult for latex to form a film at lower temperatures. With
>solvent-borne paint, be sure the temperature is at least 5 degrees above
>the dew point. If it isn't, water may condense on the surface as it cools
>while the solvent evaporates, causing an uneven blushing effect.
>
>While most conventional paints must be applied above 55 degrees
>fahrenheit, cold weather paints are designed to resist moisture, frosting,
>and blistering in temperatures as low as 35 degrees
>
>
>Corey Sherman
>corey.sherman@rcn.com
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
|