> From: Sullivan, John G, SOBUS [mailto:sullij@ATT.COM]
> Sent: Monday, November 19, 2001 11:23 AM
>
> I have been working on may brakes for a month or two. I have
> replaced the wheel cylinders and shoes on the rear, the master
> cylinder and installed rebuilt calipers from TRF. Now I have
> replaced the fluid with DOT 5 (silicon): However, I can't seem to
> get the brakes bleed.
John, you might try bench bleeding the MC. See
<http://www.vtr.org/maintain/brake-bench-bleeding.html> for details.
Peter Zaborski CF58310UO
|