vintage-race
[Top] [All Lists]

Re: Shop Floor

To: John Lehman <JELehman@ix.netcom.com>
Subject: Re: Shop Floor
From: Simon Favre <simon@mondes.com>
Date: Wed, 05 Jan 2000 10:26:18 -0800
Out here in California, nobody heats a garage. I was referring to the
problem of working on aging cars by putting aging bones against hard 
concrete. ;=(

John Lehman wrote:
> 
> > Lying on carpet scraps is also preferable to bare
> > concrete, with or without epoxy.
> >
> Don't miss the opportunity with a new shop to heat the building by warming
> the floor.  Very often this only requires a water heater and pex tubing 12"
> on center imbedded in the concrete.  Even better than lying on carpet
> scraps!
> 
> John L

<Prev in Thread] Current Thread [Next in Thread>