After 5 people tell me it is the ground for the horn, I would bet it is the
ground for the horn. ;-) I think I will put the wire links on. I might put
clean new ones on so it looks better. Thanks EVERYONE.
Yes, I did check the rubber joints out carefully. They must have been
replaced within the past several years, because neither one of them have even
an initiation of a crack or any sign of weathering.
Thanks again!!!
To: creig555@live.com
CC: triumphs@autox.team.net
From: darrellw360@mac.com
Subject: Re: [TR] TR4A steering shaft
Date: Mon, 8 Dec 2014 20:28:16 +0000
Hi Creig,
It is the ground path for the horn button.
-Darrell
On Dec 08, 2014, at 12:13 PM, Creig Houghtaling <creig555@live.com> wrote:
I'm working on a TR4A steering shaft. As I took it apart, it had ground wires
linking each section of shaft across each rubber joint. I don't see the
purpose in these wires and am considering not using them upon reassembly.
Does anybody have a reason why I should keep the ground wire links between
each section of shaft?
Creig Houghtaling 314-401-7817
St. Louis Triumph Owners Association
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
darrellw360@mac.com'>http://autox.team.net/mailman/options/triumphs/darrellw3
60@mac.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|