> I'm trying some days of Liquid
> Wrench soaking, but at -10C it is not moving much.
FWIW, some gentle heat (propane torch, or running engine up to temp) might
help. Aluminum contracts more in the cold than steel does, so the head will
actually grip the plug.
IMO PB Blaster or SiliKroil will work much better than Liquid Wrench, too.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|