Try drilling through the center of the plug threads with a 1/4 inch bit.
Soak the threads with penetrating oil. Then drive a piece of 1/4 inch square
stock steel into the hole with a hammer. And then back the threads out using
a wrench on the stock steel.
Best regards,
Tom
_________________________________________________________________
Put your friends on the big screen with Windows Vista. + Windows Live.
http://www.microsoft.com/windows/shop/specialoffers.mspx?ocid=TXT_TAGLM_CPC_M
ediaCtr_bigscreen_102007
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|