Thanks Jeff; I will research that. I have one of those reverse spiral
extractors, but I have been unable to remove the plug threaded part with it as
I am pushing as hard as I dare and it is not budging. I'm trying some days of
Liquid Wrench soaking, but at -10C it is not moving much.
Mark
________________________________
From: triumphs-bounces+mhooper=digiscreen.ca@autox.team.net on behalf of
JJJKIMBRELL0357@aol.com
Sent: Sun 02/12/2007 7:43 PM
To: triumphs@autox.team.net
Subject: [TR] sparked out
Mark:
I don't know if your problem has been resolved or not but removing the plugs
occasionally the plug body would come out & leave the thread part in when I
worked at the dealership. Mac tools has an extractor E 5 that is square &
tapers towards the end. This worked without any drilling,etc. for me on
BMW's
with an aluminum head.
Jeff Kimbrell
1962 TR4
Marietta, Ga.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|