In a message dated 5/20/2007 2:32:12 P.M. Eastern Standard Time,
DLylis@aol.com writes:
There is a locking collar provided with the HVDA kit that prevents the
spline from travel when installed with the Toyota tranny. It actually
locks the
spline in place, and is needed.
the original question did not reference an HVDA kit
You are referring to the part on the fixed
shaft that prevents the spline from exiting the fixed shaft. It does not
lock
it in place nor does it limit travel other than complete disassembly.
correct.
I didn't say otherwise.
Cheers,
Jack Mc
|