Re: [TR] Re: [6pack] TR6 drive shaft question

[DLylis@aol.com]

There is a locking collar provided with the HVDA kit that prevents the  
spline from travel when installed with the Toyota tranny.  It actually  locks 
the 
spline in place, and is needed.  You are referring to the part on  the fixed 
shaft that prevents the spline from exiting the fixed shaft.  It  does not lock 
it in place nor does it limit travel other than complete  disassembly.
 
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO





===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org