Re: [TR] TR2,3,4 thermostats

[TeriAnn Wakeman <twakeman@razzolink.com>]

> One  thing to keep in mind with a bellows thermostat is that they were
> designed  for the low pressure caps, 7 lbs I believe.  If you decide to
> change  to the higher pressure cap, the bellows will collapse under  the
> pressure.


More than just that.  The TR3 radiator has a long neck.  Standard caps 
do not make a pressure seal because they are too short.  You end up with 
a zero PSI cap unless you get one for the long TR3 neck.

TeriAnn


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org