Paul:
I would seriously consider not gluing anything to the floor boards or place it
could get water below. Why not try some strips of velcro?
Remember, moisture in an LBC's biggest enemy!!
--
Gary J. Hamilton
p.s. I plan on installing some HVAC insulation I picked up in a roll at Lowes,
only about $10, should do a good portion of the car.
This is something like it.
http://www.johnsonplastic.com/hvac-insulation-products.php#flexfoil
p.s you cannot avoid moisture, only way to preserve floors is removable rugs &
soundproofing.
-------------- Original message --------------
From: "Paul Dorsey" <dorpaul@negia.net>
> List,
> I am considering using (Liquid Nail-like) adhesive to stick
> aluminum-foil-like/padding (1/8" thick) to both top and bottom of gearbox
> cover and floorpans. This roll of special padding says it keeps out unwanted
> heat and noise and is shiny on one side. Is there a good reason not to do
> this? I will be especially careful not to trap-in moisture.
>
> Thanks,
> Paul Dorsey
> 60 TR3A
>
> Your messages not reaching the list?
> Check out http://www.team.net/posting.html
>
> === This list supported in part by The Vintage Triumph Register
> === http://www.vtr.org
>
> === Help keep Team.Net on the air: http://www.team.net/donate.html
>
> === unsubscribe/change address requests to majordomo@autox.team.net
> === Archives at http://www.team.net/archive
> === http://www.team.net/the-local
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|