Paul,
I'd use something that allowed me to remove the foil when I needed
to. You'd think that boy I'll never have to and then...you've a mess
to get it off, clean the goo off the metal, and replace all that was
damaged in removal. It can be a nightmare and a real pita to remove.
My 2cents.
Doug
At 09:44 AM 12/2/2006, you wrote:
>List,
>I am considering using (Liquid Nail-like) adhesive to stick
>aluminum-foil-like/padding (1/8" thick) to both top and bottom of gearbox
>cover and floorpans. This roll of special padding says it keeps out unwanted
>heat and noise and is shiny on one side. Is there a good reason not to do
>this? I will be especially careful not to trap-in moisture.
>
>Thanks,
>Paul Dorsey
>60 TR3A
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|